在NUC8I7HVK上安装了Ubuntu 18.04如何配置它

您好jerryn，我们很高兴知道您在英特尔®NUC上安装Ubuntu * 18.04后获得了良好的效果，并且您可以访问一些您喜爱的网站和游戏。
我们非常感谢您的反馈。我们希望其他用户可以利用您使用我们的英特尔®NUC.WannerG的经验。



以下为原文

Hello jerryn, 

We are glad to know that you got good results after installing Ubuntu* 18.04 on your Intel® NUC and that you were able to access some of your favorite websites and games. Your feedback is highly appreciated.

We hope other users take advantage of your experience with our Intel® NUC.

Wanner G. 

经过几周的使用，我遇到了一个问题。
以下是我的NUC配置方式：
32GB Crucial Dual Ranked内存
500GB M.2三星M.2 NVME
OWC Thunderbay 4 JBOD
Apple Thunderbolt 3到Thunderbolt 2适配器
小型DV1上的戴尔显示器
Apple IPS显示器（由Adafruit套件制造）mini DV 2
Linux Bionic Beaver LTS 18.04
Akitio Node与NVidia GTX 970通过thunderbolt 3连接
APC返回UPS XS 1500
操作系统加载在NVME驱动器上，/ home和/ opt位于JBOD上，由LVM管理。
靴子和每次都很棒。
只要关机后我不关闭UPS电源。
启动UPS后。
我必须在启动时玩热插拔***od。
一旦NUC上线，它就可以正常工作。
我可以完全关机，第二天返回，启动没有问题。
只有当我关闭UPS电源时才会出现问题。
我禁用了“绿色”电源管理。
JBOD此时有动力，状态为橙色。
它需要在识别和启动之前对***od进行多次热插拔。
奇。
NUC上的固件是最新的和最好的。
我在原始安装后2周更新了固件。
它可能是固件吗？
我的Akitio节点每次启动都会启动，无论是否回收。
也许电源复位TB3 / TB2适配器有问题？
我正在调查这条路线但事实上，只要UPS没有被回收，NUC每次都会打开OWC JBOD，这让我想到了。
JBOD正在通电或状态LED不是橙色。
有任何想法吗 ？
___________________________________________________
以上工作非常好。
我使用eGPU来玩Tensorflow，OpenCV和Gazebo。
AMD VegaM用于主显示，Steam Games效果很好
分辨率为2K。
我很满意这个设置



以下为原文

After several weeks of use I ran into one issue.  
 
Here's how my NUC is configured:
32GB Crucial Dual Ranked memory
500GB M.2 Samsung M.2 NVME
OWC Thunderbay 4 JBOD
Apple Thunderbolt 3 to Thunderbolt 2 adapter
Dell Monitor on mini DV1
Apple IPS monitor (built from Adafruit kit )  mini DV 2
Linux Bionic Beaver LTS 18.04
Akitio Node w/NVidia GTX 970 connected via thunderbolt 3
APC Back UPS XS 1500
 
The OS is loaded on the NVME drive,  /home and /opt are on the JBOD, managed by LVM. Boots and works great everytime.  As long as I don't power off the UPS after shutdown. After powering up the UPS. I have to play around hot plugging the ***od during boot up.  Once the NUC is online it works fine.  I can do a full shutdown, return the following day, boot up with no problems.  Only when I power off the UPS there's an issue.   I have "Green" power management disabled.  The JBOD has power at this point, the status led is orange.     It requires hotplugging the ***od several times before it is recognized and powers up.
 
 
Odd.
 
 
 
The firmware on the NUC is the latest and greatest.    I updated the firmware 2 weeks after the original install.
 
Could it be the firmware ?   My Akitio node powers up every single time, ups recycle or not.   Maybe power reset  TB3/TB2 adapter has an issue ?  I was investigating that route but the fact the NUC turns on the OWC JBOD every time as long as the UPS was not recycled makes me think otherwise.   The JBOD is getting power or the status LED would not be orange.
 
 
 
any ideas ?
___________________________________________________
The above works extremely well.    I use the eGPU for playing around with Tensorflow, OpenCV, and Gazebo.    The AMD VegaM is used for the primary display, Steam Games works great
at 2K resolution.   I am happy with the setup

Hellojerryn，我们为Linux *提供有限的支持。
我们不会在英特尔®NUC上验证Linux操作系统。
但是，我们知道它的工作原理。如果您需要任何额外的Linux Support.Linux *支持英特尔®NUCH操作，您可以参考以下信息，另一个同行可以回复您的帖子.Wanner G.



以下为原文

Hello jerryn,

We provide limited support for Linux*. We do not validate Linux operating systems on Intel® NUC. However, we know it works.

You may refer to this information below in case you need any additional Linux Support.
Linux* Support for Intel® NUC

Hopefully, another peer can respond to your post.

Wanner G.

我运行Linux和Windows 10，很快我将为NUC构建一个Hackintosh映像。
问题可能是NUC固件问题，它从上次更新开始。
它会影响Windows 10和Linux。
这是复制它的方法。
将Thunderbolt连接的***od连接到NUC，从APC XS 1500管理电源插座供电
通过Thunderbolt将Akitio Node连接到NUC，从APC XS 1500管理电源插座供电
连接主显示器，mini dv
连接辅助显示器，mini dv
加电UPS ..从内部存储器启动.. ***od不启动（空调电源打开）
Akitio节点已打开但未启动
关闭NUC。
关闭JBOD电源开关
关闭Akitio Node电源开关
关闭APC UPS。
算到密西西比州的20个，把它重新打开
打开APC ups
数到10密西西比河
打开NUC，打开Akitio节点电源开关，打开***od开关
打开NUC ..所有u***和thrunderbolt设备都已打开并处于活动状态
关闭Nuc ..关闭罚款
启动NUC ..一切都能找到。
关闭NUC，关闭APC UPS
打开UPS，打开NUC .. thrunderbolt设备不通电，你必须重复我再次提到的步骤。
我禁用了主插座电源管理，所有端口都打开了。
同样的问题。
明天晚上我将在没有UPS的情况下进行测试
之前连接到它的计算机（macpro 2013桌面）运行良好，连接了雷电硬件。
什么是thunderbolt 3端口的协议，以启用thrunderbolt连接设备的电源？
还要注意..我所有的霹雳装置都是自供电的。
环境好的时候，效果很好！
我在Linux上运行Lightworks，使用Akitio Node nvidia GTX970。
我可以退出上次固件更新吗？



以下为原文

I run Linux, and Windows 10, and soon I will build a Hackintosh image for the NUC.  The issue is possibly a NUC firmware issue,  it started with the last updated.
It affects Windows 10 and Linux.   Here's how to duplicate it.
 
Connect thunderbolt attached ***od to NUC,   power from APC XS 1500 managed power outlet
Connect Akitio Node via thunderbolt to NUC, power from APC XS 1500 managed power outlet
Connect main monitor, mini dv
Connect secondary monitor, mini dv
power up ups.. boot from internal storage..   ***od does not power up (a/c power is on)
Akitio node is switched on but does not power up
 
 
Shutdown NUC.
Turn JBOD power switch off
Turn Akitio Node power switch off
Turn off APC UPS. .. count to 20 Mississippi , turn it back on
Turn on APC ups
Count to 10 Mississippi
Turn on NUC,  Turn Akitio node power switch on, turn ***od switch on
Turn on NUC.. All u*** and thrunderbolt devices are on and active
 
Shutdown Nuc.. shuts off fine
Power up NUC.. everything powers up find.
Shut down NUC,  Shutdown APC UPS
Turn on UPS,  Turn on NUC..   thrunderbolt devices do not power up and you have to repeat the steps I mentioned all over again.
I disable the master outlet power management, all ports were on.  same issue.
 
tomorrow night I will test without the UPS.    The previous computer connected to it (macpro 2013 desktop) ran fine with the thunderbolt hardware attached to it.
 
What's the protocol for the thunderbolt 3 ports to enable power on the thrunderbolt attached devices ?
 
Also note.. all my thunderbolt devices are self powered. 
 
 
When the environment is up it works great !   I've got Lightworks on Linux working great with the Akitio Node nvidia GTX970..
 
 
Can I back out of the last firmware update ? 

你好jerryn，该主板支持两个Thunderbolt™3端口。
每个端口在3A时最高可支持5V。现在，如果您正在谈论BIOS更新，此链接提供可用版本。
您应该能够恢复到以前的版本.https：//downloadcenter.intel.com/download/28073/？product = 126143Wanner G.



以下为原文

Hello jerryn,

The board supports two Thunderbolt™ 3 ports. Each port can support up to 5V at 3A.

Now, if you are talking about the BIOS update, this link provides the versions available. You should be able to revert back to the previous version.

https://downloadcenter.intel.com/download/28073/?product=126143

Wanner G.
 

我想更新这个帖子，以防其他人遇到我的问题。
问题实际上是我的UPS。
我有backUPS Pro XS 1500并使用主/控制省电功能来控制插座的电源。
这样当我关闭PC，JBOD，USB3集线器，eGPU，主监视器，苹果ips监视器......所有电源关闭。
当我开始使用我的Hades Canyon时，我将它连接到MacPro所在的主插座。
我正在使用MacPro。
显然，APC Master / Controlled配置需要重新校准它现在工作正常。
根本不是Thunderbolt问题。
我正在编译TesnsorFlow。
顺便问一下，你有没有看到新的KDE Plasma桌面在Linux上是多么光滑？



以下为原文

I wanted to update this thread just in case anyone else encountered my problem.  The problem was actually with my UPS.      I have the backUPS Pro XS 1500 and use the Master/Controlled power saving feature to control the power to outlets.  This way when I shut off the PC, the JBODs, USB3 hub,  eGPU, main monitor, apple ips monitor.. all power off.  When I started to work with my Hades Canyon, I connected it to the master outlet, where the MacPro was.    I was working with the MacPro.  Apparently the APC Master/Controlled configuration needed to be re-calibrated  It's working fine now.  Not a Thunderbolt issue at all.    
 
I'm compiling TesnsorFlow right now.   
 
By the way, have you seen how slick the new KDE Plasma Desktop is on Linux ?