NUC8i7HNK缺少Windows 10电源和睡眠设置

1.手动下载并安装芯片组驱动程序：下载用于Windows®1064位的英特尔®芯片组设备软件，用于英特尔®NUC套件NUC8i7HNK，NUC8i7HVK
2.手动下载并安装Management Engine驱动程序：下载用于Windows®1064位的英特尔®管理引擎消费者驱动程序，用于英特尔®NUC套件NUC8i7HNK，NUC8i7HVK
3.但是NUC。
4.进入设置/系统/电源和睡眠屏幕，然后按R.H.侧的其他电源设置。
电源选项窗口将打开。
按更改计划设置并设置计算机休眠的时间。
莱昂



以下为原文

1. Download and install manually the Chipset driver: Download Intel® Chipset Device Software for Windows® 10 64-bit for the Intel® NUC Kit NUC8i7HNK, NUC8i7HVK
2. Download and install manually the Management Engine driver: Download Intel® Management Engine Consumer Driver for Windows® 10 64-bit for the Intel® NUC Kit NUC8i7HNK, NUC8i7HVK
3. Rebut NUC.
4. Enter Settings / System / Power and Sleep screen and press on Additional power settings on R.H. side. Power Option windows will open. Press on Change plan settings and set the time when computer sleeps.
 
 
Leon

嗨莱昂， 
感谢您在这个问题上帮助我。
我下载并安装了你链接的两个驱动程序。
芯片组安装没有问题。
IME表现得好像它已经安装并要求我a）卸载，或b）修复，我选择了修复选项并成功重新安装它。 
重启NUC后，没有区别。
唯一可用的电源设置是等待关闭屏幕的时间。
我确实点击了“附加电源设置”和“更改计划设置”，但是再次出现的唯一下拉菜单是在一定时间后关闭屏幕的下拉菜单。 
这是一个难题！
附：
- 我附上了两张照片，以便你可以看到我的样子。
再次感谢您的帮助！     
ChangePlanSettings.jpg 
43.8 K.      
PowerAndSleep.jpg 
115.2 K.



以下为原文

Hi Leon,
Thank you for trying to assist me on this issue. I downloaded and installed the two drivers you linked. The chipset install worked without issue. The IME behaved as if it was already installed and asked me to either a) Uninstall, or b) Repair, and I chose the Repair option and it successfully reinstalled it.
After rebooting the NUC, no difference. The only power setting available is how long to wait to turn the Screen off. I did click on Additional Power Settings and Change Plan Settings, but once again the only drop-down present is the one to turn the Screen off after a certain amount of time.
It's a conundrum!
P.S. - I've attached two pictures so you can see what it looks like on my end. Thanks again for trying to help!

•   ChangePlanSettings.jpg 43.8 K
  
  
•   PowerAndSleep.jpg 115.2 K
  
  

1.睡眠问题通常来自显示器或芯片组驱动程序问题。
由于您已经安装了芯片组驱动程序，我建议您从英特尔下载并安装两个图形驱动程序：下载适用于Windows®1064位的英特尔®高清显卡驱动程序，用于英特尔®NUC套件NUC8i7HNK，NUC8i7HVK 
下载用于Windows®1064位的Radeon™RX Vega M图形驱动程序，用于英特尔®NUC套件NUC8i7HNK，NUC8i7HVK
安装两个驱动程序后，重新启动计算机。
2.如果仍未显示睡眠选项，请扫描设备管理器，然后查找“未知设备”。
3.最后，建议下载所有其他驱动程序（选择Windows 10 64bit后）并安装在NUC上：英特尔®NUC套件NUC8i7HNK下载。
Windows安装仅包含基本驱动程序
莱昂



以下为原文

1. Sleep issues often come from display or chipset driver issues. Since you have installed the chipset driver, I suggest you to download from Intel and install the both graphic drivers also: Download Intel® HD Graphics Driver for Windows® 10 64-bit for the Intel® NUC Kit NUC8i7HNK, NUC8i7HVK
                                      Download Radeon™ RX Vega M Graphics Driver for Windows® 10 64-bit for the Intel® NUC Kit NUC8i7HNK, NUC8i7HVK
 
After installing both drivers, reboot your computer.
2. If the sleep option will still not appear, scan through device manager, and look for "unknown device".
3. In the end, it is advisable to download all other drivers (after choosing Windows 10 64bit) and install on your NUC: Downloads for Intel® NUC Kit NUC8i7HNK . The Windows installation comes only with the basic drivers
 
Leon
 

莱昂， 
非常感谢您的帮助，因为您的建议已经解决了这个问题。
在比较我安装的图形驱动程序的版本时，我发现Radeon GPU安装了默认的“Microsoft Basic Display Adapter”驱动程序。
此外，我的英特尔GPU驱动程序的版本是远离（甚至不像24.20.100.6229），所以我怀疑可能是微软
当我第一次安装Windows 10时，我选择了英特尔驱动程序＆amp;
根据用户手册的Support Assistant页面，让它自动安装所有驱动程序（链接如下）。
英特尔®驱动程序和
支持助理
它重新启动了至少6次并安装了很多驱动程序，因为我一直返回到同一个网页并运行该工具并让它做它的事情。
它确实成功完成并给了我一条消息（参见随附的屏幕截图），该消息表示所有驱动程序都是最新的，并且在所有检测到的硬件旁边都安装了绿色复选框。
为什么驱动程序支持助手没有像安装适当的GPU驱动程序那样基本做一些事情。
无论如何，再次感谢您的帮助！
史蒂夫     
IntelDriverAssist.jpg 
89.2 K.



以下为原文

Leon,
Thank you so much for your help, as your suggestions have resolved this issue.
In comparing the versions of the graphics drivers that I had installed, I discovered that the Radeon GPU had a default "Microsoft Basic Display Adapter" driver installed. Also, the version of my Intel GPU driver was way off (not even similar to 24.20.100.6229), so I suspect that may have been a Microsoft
When I first installed Windows 10, I went to the Intel Driver & Support Assistant page per the user's manual, and let it automatically install all of the drivers (link below).
Intel® Driver & Support Assistant
 
It rebooted at least 6 times and installed a lot of drivers as I kept returning to that same web page and running the tool and letting it do its thing.
It did finish successfully and gave me the message (see attached screen shot) that said that all of the drivers were up to date and installed with green checkboxes next to all of the detected hardware.
Why the Driver Support Assistant didn't do something as basic as installing the appropriate GPU drivers is beyond me.
 
In any event, thank you once again for your help!
 
-Steve

•   IntelDriverAssist.jpg 89.2 K
  
  

好的，就是哇！
在我向您发送上述回复后，我想知道是否还有其他需要安装的驱动程序，而Intel Driver Assistant无法安装。
当我开始时，我的Downloads文件夹中有5个文件。
当我完成比较英特尔网站上为NUC8i7HNK for Windows 10发布的所有实际驱动器的版本并安装丢失/过时的版本时，我最终在我的下载文件夹中有14个文件！
我对在NUC上安装Windows 10的任何人的建议是完全跳过英特尔驱动程序助手工具并自行下载。
再次感谢。



以下为原文

OK, just WOW! After I sent you the reply above, I wondered if there were any other drivers that still needed to be installed that the Intel Driver Assistant failed to install.
When I started out, I had 5 files in my Downloads folder. By the time I got done comparing the versions of all the actual drives posted on the Intel website for the NUC8i7HNK for Windows 10 and installing the missing / out of date ones, I ended up with 14 files in my downloads folder! 
My advice to anyone installing Windows 10 on an NUC is to just completely SKIP the Intel Driver Assistant tool and download them yourself.
Thanks again.

我很高兴您解决了问题。
英特尔驱动程序＆amp;
支持助手是很好的，非常有前途的工具。
但是，如果您将阅读此论坛和其他英特尔产品论坛，您会发现您不是第一个不适合该工具的工具。
因此，作为结果，我手动安装我的驱动程序，并为其他用户建议相同的方法。
问候
莱昂



以下为原文

I'm glad that you have your problem solved. The Intel Driver & Support Assistant is nice and very promising tool. However, if you will read this forum and the other Intel product forums, you will find that you are not the first one that the tool wasn't work for him. So, as result of this I install my drivers manually and advice the same method for other users.
 
Regards
Leon