[问答]

stm32串口1和串口2初始化程序分享

1593 STM32

问答对人有帮助，内容完整，我也想知道答案 0 STM32串口1和串口2初始化程序分享 0
2021-12-16 06:03:26　　评论淘帖0 邀请回答您可以邀请以下用户，快速回答问题 × heks 该类别下有 50 个回答。邀请回答 hgimtk 该类别下有 44 个回答。邀请回答新星之火12138 该类别下有 42 个回答。邀请回答 wang21cj 该类别下有 41 个回答。邀请回答 chm5 该类别下有 40 个回答。邀请回答 hjfjsdgfjdsf 该类别下有 37 个回答。邀请回答 fdjslkjd 该类别下有 35 个回答。邀请回答 uvysdfydad 该类别下有 35 个回答。邀请回答 werywer 该类别下有 35 个回答。邀请回答 h1654155957.9520 该类别下有 35 个回答。邀请回答 jenny042 该类别下有 34 个回答。邀请回答 dfzvzs 该类别下有 34 个回答。邀请回答维生素B2 该类别下有 34 个回答。邀请回答凤毛麟角该类别下有 34 个回答。邀请回答 hfgdzc 该类别下有 33 个回答。邀请回答 ggfvxv 该类别下有 33 个回答。邀请回答刘洋该类别下有 33 个回答。邀请回答 meihuacg 该类别下有 33 个回答。邀请回答储蓄叛逆该类别下有 32 个回答。邀请回答尼克wo 该类别下有 32 个回答。邀请回答举报张伟相关推荐 • 如何对STM32串口UART1进行初始化设置呢 1108 • 如何对STM32F4串口进行初始化呢 2151 • STM32串口初始化函数代码分享 658 • 如何对STM32串口进行初始化呢 1618 • STM32串口如何使用偶校验时初始化？ 1070 • 如何对STM32串口进行初始化配置呢 1233 • 如何实现STM32串口的初始化和中断设置？ 1494 • 如何对STM32F4串口相关的参数进行初始化呢 1665 • stm32的USART1串口在调试中遇到哪些问题呢 1699 • STM32串口为什么要在初始化后才能读取USART_FLAG_TC标志位呢 583 1个回答

答案对人有帮助，有参考价值 0 void USART1_Initialise(u32 bound) { //GPIO端口设置 GPIO_InitTypeDef GPIO_InitStructure; USART_InitTypeDef USART_InitStructure; NVIC_InitTypeDef NVIC_InitStructure; RCC_APB2PeriphClockCmd(RCC_APB2Periph_USART1\|RCC_APB2Periph_GPIOA\|RCC_APB2Periph_AFIO, ENABLE); //USART1_TX PA.9 GPIO_InitStructure.GPIO_Pin = GPIO_Pin_9; GPIO_InitStructure.GPIO_Speed = GPIO_Speed_50MHz; GPIO_InitStructure.GPIO_Mode = GPIO_Mode_AF_PP; GPIO_Init(GPIOA, &GPIO_InitStructure); //USART1_RX PA.10 GPIO_InitStructure.GPIO_Pin = GPIO_Pin_10; GPIO_InitStructure.GPIO_Mode = GPIO_Mode_IPU; GPIO_Init(GPIOA, &GPIO_InitStructure); //Usart1 NVIC 配置 NVIC_InitStructure.NVIC_IRQChannel = USART1_IRQn; NVIC_InitStructure.NVIC_IRQChannelPreemptionPriority=3 ; NVIC_InitStructure.NVIC_IRQChannelSubPriority = 3; // NVIC_InitStructure.NVIC_IRQChannelCmd = ENABLE; //IRQ通道使能 NVIC_Init(&NVIC_InitStructure); //根据NVIC_InitStruct中指定的参数初始化外设NVIC寄存器USART1 //USART 初始化设置 USART_InitStructure.USART_BaudRate = bound;//一般设置为9600; USART_InitStructure.USART_WordLength = USART_WordLength_8b; USART_InitStructure.USART_StopBits = USART_StopBits_1; USART_InitStructure.USART_Parity = USART_Parity_No; USART_InitStructure.USART_HardwareFlowControl = USART_HardwareFlowControl_None; USART_InitStructure.USART_Mode = USART_Mode_Rx \| USART_Mode_Tx; USART_Init(USART1, &USART_InitStructure); USART_ITConfig(USART1, USART_IT_RXNE, ENABLE);//开启中断 USART_Cmd(USART1, ENABLE); //使能串口 } void USART2_Initialise( u32 bound ) { GPIO_InitTypeDef GPIO_InitStructure;//I/O?ú3?ê??ˉ?á11ì? NVIC_InitTypeDef NVIC_InitStructure;//?D??3?ê??ˉ?á11ì? USART_InitTypeDef USART_InitStructure;//′??ú3?ê??ˉ?á11ì? /* Enable the USART2 Pins Software Remapping / RCC_APB2PeriphClockCmd(RCC_APB2Periph_GPIOA\|RCC_APB2Periph_AFIO, ENABLE); RCC_APB1PeriphClockCmd(RCC_APB1Periph_USART2\|RCC_APB2Periph_AFIO, ENABLE); / Configure USART2 Rx (PA.03) as input floating / GPIO_InitStructure.GPIO_Pin = GPIO_Pin_3; GPIO_InitStructure.GPIO_Mode = GPIO_Mode_IPU; GPIO_Init(GPIOA, &GPIO_InitStructure); / Configure USART2 Tx (PA.02) as alternate function push-pull / GPIO_InitStructure.GPIO_Pin = GPIO_Pin_2; GPIO_InitStructure.GPIO_Speed = GPIO_Speed_50MHz; GPIO_InitStructure.GPIO_Mode = GPIO_Mode_AF_PP; GPIO_Init(GPIOA, &GPIO_InitStructure); / Enable the USART2 Interrupt / NVIC_InitStructure.NVIC_IRQChannel = USART2_IRQn; NVIC_InitStructure.NVIC_IRQChannelPreemptionPriority = 3; NVIC_InitStructure.NVIC_IRQChannelSubPriority = 3; NVIC_InitStructure.NVIC_IRQChannelCmd = ENABLE; NVIC_Init(&NVIC_InitStructure); USART_InitStructure.USART_BaudRate = bound; USART_InitStructure.USART_WordLength = USART_WordLength_8b; USART_InitStructure.USART_StopBits = USART_StopBits_1; USART_InitStructure.USART_Parity = USART_Parity_No; USART_InitStructure.USART_HardwareFlowControl = USART_HardwareFlowControl_None; USART_InitStructure.USART_Mode = USART_Mode_Rx \| USART_Mode_Tx; USART_Init(USART2, &USART_InitStructure); USART_ITConfig(USART2, USART_IT_RXNE, ENABLE); / Enable USART2 */ USART_Cmd(USART2, ENABLE); } void USART2_IRQHandler(void) { if(USART_GetFlagStatus(USART2, USART_FLAG_RXNE) == SET) { //USART_SendData(USART2, USART_ReceiveData(USART2)); } } void USART1_IRQHandler(void) //串口2中断服务程序 { if(USART_GetITStatus(USART1, USART_IT_RXNE) != RESET) { } }

2021-12-16 09:34:46 评论举报陈铮