完善资料让更多小伙伴认识你,还能领取20积分哦, 立即完善>
电子发烧友论坛|
我认为您将DSP48A与数字信号处理器(如TI TMS320Cxxx)混淆。
DSP48A实际上只是一个由ALU和MAC组成的构建模块。 它不是“处理器” 在TI DSP意义上。 您是否阅读过DSP48A用户指南: http://www.xilinx.com/support/documentation/user_guides/ug431.pdf 基本上除了单元之外没有专用的互连 进位逻辑。 - Gabor - Gabor 以上来自于谷歌翻译 以下为原文 I think you are confusing DSP48A's with a Digital Signal Processor such as a TI TMS320Cxxx. The DSP48A is really just a building block consisting of ALU and MAC. It is not a "processor" in the sense of the TI DSP. Have you read the DSP48A user guide: http://www.xilinx.com/support/documentation/user_guides/ug431.pdf Basically there is no dedicated interconnection between the units with the exception of the carry logic. -- Gabor -- Gabor |
|
|
|
|
只有小组成员才能发言,加入小组>>
3147 浏览 7 评论
3437 浏览 4 评论
Spartan 3-AN时钟和VHDL让ISE合成时出现错误该怎么办?
2899 浏览 9 评论
4100 浏览 0 评论
如何在RTL或xilinx spartan fpga的约束文件中插入1.56ns延迟缓冲区?
3083 浏览 15 评论
请问vc707的电源线是如何连接的,我这边可能出现了缺失元件的情况导致无法供电
1359浏览 1评论
求一块XILINX开发板KC705,VC707,KC105和KCU1500
1197浏览 1评论
/9
小黑屋| 手机版| Archiver| 电子发烧友 ( 湘ICP备2023018690号 )
GMT+8, 2025-12-13 18:05 , Processed in 0.724788 second(s), Total 74, Slave 57 queries .
Powered by 电子发烧友网
© 2015 bbs.elecfans.com
关注我们的微信
下载发烧友APP
电子发烧友观察
版权所有 © 湖南华秋数字科技有限公司
电子发烧友 (电路图) 湘公网安备 43011202000918 号 电信与信息服务业务经营许可证:合字B2-20210191

淘帖
1349
