NUC7i7DNK2E显示器不闪烁

您好Hansano，感谢您加入此英特尔社区。我了解您的双显示器设置中的某台显示器在连接到您的英特尔®NUC时会不断关闭。
我想提供一些有关此问题的信息。我们建议您查看多显示器的显示配置到英特尔®NUC.https：//www.intel.com/content/www/au/en/support/articles
/000005571/mini-pcs.html正如您所看到的，您使用的双显示器配置可能无法正常工作。
换句话说，使用第三方适配器时可能会遇到性能问题。
遗憾的是，我们无法保证您的系统配置能够正常工作，因为始终建议使用电缆进行直通连接。
万纳G.



以下为原文

Hello Hansano, 

Thank you for joining this Intel Community.

I understand that one of your monitors on your dual monitor setup constantly turns off when connected to your Intel® NUC. I would like to provide some information about this issue.

Our recommendation is that you can review the Display Configurations for Multiple Displays to Intel® NUC. 
https://www.intel.com/content/www/au/en/support/articles/000005571/mini-pcs.html

As you can see, the dual monitor configuration you are using may not work properly. In other words, you can experience performance issues when using 3rd party adapters. Unfortunately, we cannot guarantee that your system configuration will work since a straight-through connection with a cable is always recommended.
 
Wanner G. 

HelloHansano，您是否能够查看多个显示器的显示配置到英特尔®NUC？如果您仍需要任何帮助，我们将很乐意为您提供帮助.Wanner G.



以下为原文

Hello Hansano, 

Were you able to review the Display Configurations for Multiple Displays to Intel® NUC?

If you still need any assistance, we will be glad to help you.

Wanner G. 

你好Wanner，
我实际上用不同的显示器交换显示器，所以我不再需要使用任何适配器。
从那以后，双重设置对我来说很好。
谢谢你的回复。
Hansano



以下为原文

Hello Wanner,
 
I actually swapped the displays with different ones, so I don´t have to use any adapters anymore. Since then the dual setup is working fine for me.
Thank you for your replys.
 
Hansano