如何应用CLK和RSTn？

嗨
我使用virtex5 xc5vlx110t和ml523板。
我想用示波器进行测试，所以我应该连接设备和示波器。
但是，我不知道如何应用clk，RSTn和LOAD。
在通过测试平台的模拟中，我只是编写了代码，我想知道在我认证实际设备时该怎么做。
关于clk，rstn和load的测试平台代码是
常数CLK_period：时间：= 5 us;
CLK_process：进程开始CLK等待CLK_period / 2;
CLK等待CLK_period / 2;
结束过程;
stim_proc：进程开始 - 等待10 ns;
等待CLK_period * 1;
RSTn等待CLK_period * 1;
RSTn等;
结束过程;
load_proc：进程开始等待52.6us;
LOAD等待CLK_period * 1;
LOAD等待42.4us;
结束过程;
谢谢。



以下为原文

hi
I use virtex5 xc5vlx110t with ml523 board.

I want to the test by using oscilloscope, so I should connect between device and oscilloscope.

but, I don't know how to apply clk, RSTn and LOAD .

In the simulation through the test-bench, I simply wrote the code, and I wonder what to do when I certify the actual device.

my test-bench code about clk, rstn and load is

constant CLK_period : time := 5 us;
CLK_process :process
begin
CLK <= '0';
wait for CLK_period/2;
CLK <= '1';
wait for CLK_period/2;
end process;

stim_proc: process
begin
--wait for 10 ns;
wait for CLK_period*1;
RSTn <= '1';
wait for CLK_period*1;
RSTn <= '0';
wait;
end process;

load_proc: process
begin
wait for 52.6us;
LOAD <= '1';
wait for CLK_period*1;
LOAD <= '0';
wait for 42.4us;
end process;

thank you.