[问答]

8594E CRT焦点死了

1170 crt

问答对人有帮助，内容完整，我也想知道答案 0 您好，我最近用我在ebay上购买的新CRT替换了我的旧CRT。旧CRT非常破旧。新的CRT模糊不清。这是奇怪的事情......焦点**什么也没做，也没有对旧的CRT做任何事情。我已从两个显示器PCB上取下每个电解帽并检查出来，没有问题。任何想法为什么焦点死了？谢谢肯以上来自于谷歌翻译以下为原文 Hello, I recently replaced my old CRT with a new one I purchased on ebay. The old CRT was very worn out. The new CRT is fuzzy and out of focus. Here's the odd thing though...the focus does nothing and did nothing on the old CRT as well. I have pulled every electrolytic cap from both display PCB's and checked the out, no issues there. Any ideas why the focus ** is dead? Thanks Ken 0
2019-2-20 14:52:41　　评论淘帖0 邀请回答您可以邀请以下用户，快速回答问题 × kingnet_52040 该类别下有 195 个回答。邀请回答 60user7 该类别下有 81 个回答。邀请回答蓝色冰汐该类别下有 45 个回答。邀请回答醉狼工作室该类别下有 41 个回答。邀请回答 ianwhoani 该类别下有 30 个回答。邀请回答 dkhwakd 该类别下有 25 个回答。邀请回答 aaabbb567 该类别下有 23 个回答。邀请回答 e08506806 该类别下有 20 个回答。邀请回答 szzjfyp 该类别下有 18 个回答。邀请回答 sonia87 该类别下有 16 个回答。邀请回答 ningee 该类别下有 16 个回答。邀请回答 zouqinxiang 该类别下有 15 个回答。邀请回答 xj5548 该类别下有 15 个回答。邀请回答 derek88 该类别下有 14 个回答。邀请回答 daichuangs 该类别下有 14 个回答。邀请回答 hzmbs2016 该类别下有 12 个回答。邀请回答 JST2006 该类别下有 12 个回答。邀请回答 www037 该类别下有 11 个回答。邀请回答 ToGoodSoft 该类别下有 11 个回答。邀请回答 juujwfdf 该类别下有 11 个回答。邀请回答举报李天氍相关推荐 • 跟踪生成器怎么移植到8594E上 1301 • 如何在HP 8594E的电池没电后恢复序列号？ 1155 • 多个8594E型号未通过噪声边带测试失败 1230 • 8594E CAL半带宽永远运行 5780 • HP8594E规格看起来像YTO/YIG 2596 • HP 85024A RF Prob什么是最大RF输入 1424 • 如何控制Text 输入控件的焦点 3180 • secure-CRT出现乱码 2065 • HP8568B和HP8566的模糊格线问题 1229 • WM_SetFocus的焦点如何设置 2825 1个回答

答案对人有帮助，有参考价值 0 如果您不了解它，用户可以在仪器侧面访问的焦点就是精细调整。监视器的背面也有一个课程调整。即使在没有定制工具的情况下关闭仪器盖，您也无法访问。您需要将显示器组件向上提出机箱以访问此课程调整。通过监视器外壳的进入孔靠近控制线穿过外壳的位置。要小心高压迈克以上来自于谷歌翻译以下为原文 If you aren't aware of it, the focus that is user accesible on the side of the instrument is just the fine adjustment. There is a course adjustment on the backside of the monitor as well. This isn't something that you can access even with the instrument cover off without a custom made tool. You will need to lift the monitor assembly up out of the chassis to access this course adjustment. The access hole through the monitor case is near to where the control wires run through the case. BE CAREFULL OF THE HIGH VOLTAGES Mike

2019-2-20 15:05:15 评论举报李健