PNA-X Cal Set Manager系统挂bug

那是一个新的。
我会看看我是否可以复制它。
拥有你的状态文件会很好，但我们会先在这里尝试复制它。
如果我们不能这样做，我们将不得不找到一种方法来使用一些文件共享服务上传.csa文件。
你使用的每条迹线有多少点？
每个通道有多少条迹线？
使用任务管理器，在崩溃之前是否还有可用的内存？
你能创建和发布.sta文件吗？
它不会包含内存，但它将帮助我们了解您当前的状态，它应该只是.csa文件的一小部分。



     以下为原文

  Well that is a new one.
I will see if I can duplicate it.  It would be nice to have your state file but we will first try to duplicate it here.  If we can't do that we will have to find a way to upload your .csa file using some file sharing service.

How many points per trace are you using?  How many traces per channel?  Using Task manager, is there any memory still available just before it crashes?

Can you create and post just a .sta file.  It will not contain the memory but it will help us understand your current state and it should be a tiny fraction of the .csa file.

嗨，我想早点发帖，但讨论论坛停留在'只读'模式。
至于你的问题：1）我正在使用IM频谱转换器测量通道，因此每个说没有扫描点。
我使用的校准文件是2端口B，1 S参数校准，20,001点。
对于每个频道，我只使用1个曲目。
2）对于内存问题，我附上了任务管理器的截图。
据我所知，应该有足够的记忆。
3）我将它保存为.sta文件，但它仍然是46兆字节。
4）我认为这是Cal Set manager对话框窗口显示问题的原因是因为我能够加载文件。
我也可以打开Cal Set Manager而不会崩溃，因为有问题的校准文件在列表中更进一步。
但是，一旦我向下滚动以显示有问题的校准文件，它会立即冻结计算机。
（键盘不起作用，所以不能调出任务管理器）。
现在我能够创建这样一个条件的唯一原因是因为我使用了“复制通道”命令来创建一个IM光谱通道的副本，其中校准文件已经绑定到它。
在使用“复制通道”命令之前，我有68个IM光谱转换器测量通道链接到一个校准文件。
我能够在“Cal Set”管理器下正确查看，没有任何问题。
但是，一旦我通过“复制通道”命令创建了6个额外的IM频谱转换器通道，那么当我尝试从“校准集”管理器查看校准文件时遇到问题。
这就是为什么我推测大约70个通道或更多通道绑定到同一个校准文件会遇到这个问题。
如果您需要更多信息，请告诉我
12_06_2013-cal设置崩溃内存2.PNG47.3 KB



     以下为原文

  Hi,

I wanted to post earlier, but the discussion forum was stuck in 'read only' mode.

As for your questions:

1) I am using IM Spectrum converter measurement channels, so there are no sweep points per say. The calibration file I am using is a 2 port B,1 S parameter calibration with 20,001 points. For each channel, I am only using 1 trace.

2) For memory questions, I have attached the screenshots from the Task Manager. As far as I can see, there should be enough memory.

3) I saved it as a .sta file, but it is still 46 megabytes. 

4) The reason why I think it's a Cal Set manager dialog window display issue is because I am able to load the file up. I am also able to open up the Cal Set Manager without it crashing, because the calibration file in question is further down in the listing. However, once I scroll down enough to display the calibration file in question, it instantly freezes up the computer. (keyboard doesn't work so can't bring up Task Manager). Now the only reason I was able to create such a condition was because I used the 'Copy Channel' command to create a copy of 1 of the IM spectrum channels which had the calibration file binded to it already. Before using the 'Copy Channel' command, I had 68 IM spectrum converter measurement channels linked to a single calibration file. I was able to view that properly under the 'Cal Set' Manager without any problems. However, once I created 6 extra IM spectrum converter channels via the 'Copy Channel' command, that's when I ran into problems when trying to view that calibration file from the 'Cal Set' Manager. So that's why I'm speculating that around 70 channels or more binded to the same calibration file will encounter this problem. 

Let me know if you need more info,
rok

附件

• 12_06_2013-cal set crashing memory 1.PNG20.3 KB
  
• 12_06_2013-cal set crashing memory 2.PNG47.3 KB
  

我今天没有上班，但我将在星期一回来，并将调查此事。
.sta文件仍然有用。
我会看看我是否能找到一些方法让你轻松上传。



     以下为原文

  I was not at work today, but I will return on Monday and will look into this.
The .sta file would still be useful.  I will see if I can find some way for you to upload it easily.

以下是一些可用于上传该文件的免费文件共享站点：http：//www.hongkiat.com/blog/15-great-free-online-file-sharing-alternatives/如果这对您不起作用，
我可以暂时通过SFTP启用写入我们的Web服务器。
让我知道。
如果需要，您可以通过PM向我发送信息。



     以下为原文

  Here are some free file sharing sites that you can use to upload that file: http://www.hongkiat.com/blog/15-great-free-online-file-sharing-alternatives/

If that will not work for you, I might be able to enable writing to our web server via SFTP temporarily.  Let me know.

You can send me info via a PM if needed.