[问答]

错误：BD 41-542无法在锁定块上设置参数：Xapp794

2230

问答对人有帮助，内容完整，我也想知道答案 0 嗨，我正在尝试在vivado 13.2中运行xapp794，如上所述： https://www.xilinx.com/support/d ... -1080p60-camera.pdf 并生成所有IP的评估许可证。我仍然因缺陷像素校正IP而出现以下错误：错误：[BD 41-542]无法在锁定块上设置参数。块'v_spc_1'已被锁定，因为：IP'design_1_v_spc_1_0'需要许可证但未找到有效许可证。此IP没有可用的输出。但是，许可检查点可能会阻止在某些工具流中使用此IP。请从“工具”菜单中选择“报告IP状态”以获取解锁说明。错误：[Common 17-39]'set_property'因早期错误而失败。如第42页所述，图像处理管道IP已包含此IP，我已将其包括在内。那么这里有什么问题？以上来自于谷歌翻译以下为原文 Hi, I am trying to run xapp794 in vivado 13.2 as mentioned: https://www.xilinx.com/support/d ... -1080p60-camera.pdf and generated the evaluated license for all IP. still I am getting following error for defective pixel correction IP: ERROR: [BD 41-542] Parameter cannot be set on a locked block. The block 'v_spc_1' is locked, because: IP 'design_1_v_spc_1_0' requires a license but no valid license was found. No useable outputs are available for this IP. However license checkpoints may prevent use of this IP in some tool flows. Please select 'Report IP Status' from the 'Tools' menu for instructions to unlock. ERROR: [Common 17-39] 'set_property' failed due to earlier errors. As mentioned in page 42, image processing pipeline IP already contains this IP and I already included this. What is wrong here then? 0
2018-12-24 14:07:20　　评论淘帖0 邀请回答您可以邀请以下用户，快速回答问题 × asd008 该类别下有 32 个回答。邀请回答 aaaa321 该类别下有 27 个回答。邀请回答 doublelove 该类别下有 26 个回答。邀请回答 vynywrwr 该类别下有 21 个回答。邀请回答 hgjhgd 该类别下有 19 个回答。邀请回答 bwerwer 该类别下有 18 个回答。邀请回答 hanyan533 该类别下有 18 个回答。邀请回答 Jaionm 该类别下有 18 个回答。邀请回答 wang2222222 该类别下有 17 个回答。邀请回答 handsomelchcpp 该类别下有 17 个回答。邀请回答 binro 该类别下有 16 个回答。邀请回答 ningee 该类别下有 16 个回答。邀请回答 wznnzw 该类别下有 15 个回答。邀请回答 myf888 该类别下有 15 个回答。邀请回答 zcy615 该类别下有 14 个回答。邀请回答 wanglinhua2627 该类别下有 14 个回答。邀请回答 guotong1984 该类别下有 14 个回答。邀请回答 yhxc 该类别下有 14 个回答。邀请回答 armortech 该类别下有 14 个回答。邀请回答 60user25 该类别下有 14 个回答。邀请回答举报赖文文相关推荐 • SDK构建了linux应用程序出现错误的解决办法？ 1793 • 使用ZYBO板在VIVADO中使用AXI4 BFM仿真接口创建外设IP时收到错误消息 2374 • 无法在QPLL的硬件中获得锁定信号的解决办法？ 2460 • AD9510-VCO/PCBZ开发板锁相环无法锁定 1453 • 实现XAPP860时出现问题如何解决 1413 • 为什么基于xapp894的Spartan6 MIPI TX接口电路MIPI无法接收数据？ 6019 • 将Zynq UltraScale +模块连接到AXI互连模块出错该怎么办？ 4344 • 怎么在相位噪声、杂散和锁定时间达成平衡？ 1276 • 锁定IP但report_ip_status说一切都很好是为什么？ 1733 • OP-TEE无法在锁定的i.MX6UL上初始化JR怎么解决？ 250 1个回答

答案对人有帮助，有参考价值 0 @fpgalearner，您是否拥有核心“缺陷像素校正”的许可？从错误消息，该工具抱怨许可证。核心已停止使用Vivado 2014.1。您需要联系Xylon以了解有关此IP的问题。 https://www.xilinx.com/products/intellectual-property/ef-di-def-pix-corr.html 另请查看以下论坛帖子： https://forums.xilinx.com/t5/Zynq-All-Programmable-SoC/How-to-connect-an-analog-camera-to-z-7010-z-7020/m-p/671615 --Syed -------------------------------------------------- -------------------------------------------请注意 - 请标记答案如果提供的信息有用，请“接受为解决方案”。给予您认为有用并回复导向的帖子。感谢Kudos .------------------------ -------------------------------------------------- ------------------- 以上来自于谷歌翻译以下为原文 @fpgalearner, Do you have license for the core "Defective Pixel Correction"? From the error message, the tool is complaining about license. The core is discontinued from Vivado 2014.1, You need have to contact Xylon in relation to the questions with respect to this IP. https://www.xilinx.com/products/intellectual-property/ef-di-def-pix-corr.html Also check the below forum thread: https://forums.xilinx.com/t5/Zynq-All-Programmable-SoC/How-to-connect-an-analog-camera-to-z-7010-z-7020/m-p/671615 --Syed --------------------------------------------------------------------------------------------- Kindly note- Please mark the Answer as "Accept as solution" if information provided is helpful. Give Kudos to a post which you think is helpful and reply oriented. ---------------------------------------------------------------------------------------------

2018-12-24 14:17:03 评论举报赵雪培