是否可以通过在APPLICATION_INIT（）中放置错误代码来阻止CYBLE-013025

我在AppultisIn（）函数中放置了一些代码，因为我试图在运行时自定义设备。在这样做的过程中，我认为两个不同的项目对我正在经历的问题负责。1：我在if语句下面的函数中放置了一个无限的while循环，看看它是否被击中（如果程序没有做广告，我认为它击中了if语句）。2：我尝试了一个PUTARTHI打印之前，实际上设置它没有注意到它在那里。
我想知道在进入HCI UART可编程模式之前，AppultIsIn（）函数是否可能被调用。如果是这样，它将继续硬故障或挂起，永不再编程。
有没有办法硬复位，所以这个代码不再驻留在芯片？
我有3个不同的芯片，现在有这个问题。我不相信他们曾经震惊过。



     以下为原文
  I placed some code in the APPLICATION_INIT() function because I am trying to custom set the device .local_name value at run time. In the process of doing so, two different items I think are responsible for the problem I am experiencing. 1: I placed an infinite while loop in the function under an if statement to see if it was being hit (If the program didn't advertise I figured it hit the if statement). 2: I tried a puart_print before actually setting it up without noticing that it was in there.

I'm wondering if the  APPLICATION_INIT() function might get called before entering the HCI Uart programmable mode. If so, it is going to continue to hard fault or hang and never program again.

Is there a way to hard reset so this code no longer resides in the chip?

I have 3 different chips that now have this problem. I don't believe they were ever shocked.