合成/翻译后硬件丢失

大家好，
我正在使用ISE设计套件14.7。
我的问题是：我有一个行为模拟，可以按照我的意愿运作。
当我尝试使用翻译后模拟来查看它时，我设计的很大一部分并没有出现在ISIM窗口的设计层次结构中。
我尝试过几件事。
首先，我从缺失的硬件中取出一个信号进入顶层，试图观察它。
然后，该特定信号出现在层次结构中，但该级别的其余功能不会出现。
我还告诉XST保持层次结构，但这并没有改变结果。
缺少的部分是从顶层开始的三个级别的组件。
有没有办法迫使ISE保留我的所有信号，组件，层次结构等？
我上传了我的项目，但它比服务器允许的社区论坛更大。
谢谢，
杰夫怀特



以下为原文

Hi all,

I'm using ISE design suite 14.7. My question is this: I have a behavioral simulation that works as I want it to. When I try to look at it with a post-translate simulation, a good chunk of my design doesnt' appear in the design hierarchy  of the ISIM window. I've tried a couple of things. First, I pulled a signal from the missing hardware into the top level to try to watch it. That specific signal then appears in the hierarchy, but the rest of the functionality of that level does not. I also told XST to keep the hierarchy but that did not change the result. The part that is missing is a component about three levels down from the top level.

Is there a way to force ISE to keep all my signals, components, the hierarchy, etc? I'd upload my project but it is larger than is allowed by the server for the community forum.

thank you,

Jeff White