PNA-X N5242A的一堆错误

嗨，我们有一个PNA-X N5242A，有以下选项：400 P04 080 419 423 UNL 016 014 081 S02出现了一堆错误，其中一些同时出现。
出现的错误是：“Phaselock丢失，LO合成器MAIN，积分器高”“Unlevelled，LO drive”“Unlevelled，LO Synthesizer”“Phaselock丢失”经过您的论坛后，其中一个线程暗示“相位丢失”可能
由于温度漂移而发生。
我将PNA关闭大约10-15分钟并重新打开，但发现软件启动后出现的错误相同。
现在几乎是午夜。
我不认为我今晚可以睡觉，如果有人能帮助我，我真的很感激。
此外，在我看来，所有的错误都与仪器的功能有关。
也许功率校准可能会有所帮助？
我不是高级用户，之前从未做过类似的事情。
所以在我坚持下去之前，我想得到一些建议。
先谢谢你。



     以下为原文

  Hi,

We have a PNA-X N5242A with the following options:
400 P04 080 419 423 UNL 016 014 081 S02

There are a bunch of errors that appeared, some of them at the same time. The errors that appeared were:
"Phaselock lost, LO synthesizer MAIN, integrator high"
"Unlevelled, LO drive"
"Unlevelled, LO Synthesizer"
"Phaselock lost"

After going through your forum, one of the thread suggested that "phaselock lost" could occur due to temperature drift.
I turned the PNA off for about 10-15 mins and switched it back on, only to find the same errors appearing after the software start.

It is almost midnight at my place now.
I dont think I can get any sleep tonight and I would really appreciate if anyone could help me please.

Also, seems to me like all of the errors are related to the power of the instrument.
Maybe a power calibration might help?  I am not an advanced user and have never done something like this before.
So before I stick my head into, I would like to get some advice.

Thank you in advance.