完善资料让更多小伙伴认识你,还能领取20积分哦, 立即完善>
我在定制板上有一个PSoC4LE设备。器件程序和IMO和32.768 kHz振荡器旋转良好。24MHz振荡器不启动,不运行。有其他人遇到类似的问题吗?据我所知,电源看起来很好,铁轨完全绕过了。
以上来自于百度翻译 以下为原文 I have a PSoC4-BLE device on a custom board. The device programs and the IMO and 32.768KHz oscillator spin up fine. The 24MHz oscillator does not start and does not run. Has anyone else run into a similar problem? The power supplies look good as far as I can tell, and the rails are thoroughly bypassed. |
|
相关推荐
1个回答
|
|
你好,Jacques Richer,
请分享您的自定义板示意图。 谢谢, 心理医生。 以上来自于百度翻译 以下为原文 Hello Jacques Richer, Please share the Schematic of your custom board. Thanks, PSYU. |
|
|
|
只有小组成员才能发言,加入小组>>
727个成员聚集在这个小组
加入小组1939 浏览 1 评论
1686 浏览 1 评论
3452 浏览 1 评论
请问可以直接使用来自FX2LP固件的端点向主机FIFO写入数据吗?
1612 浏览 6 评论
1407 浏览 1 评论
小黑屋| 手机版| Archiver| 电子发烧友 ( 湘ICP备2023018690号 )
GMT+8, 2024-7-1 05:07 , Processed in 0.712858 second(s), Total 76, Slave 60 queries .
Powered by 电子发烧友网
© 2015 bbs.elecfans.com
关注我们的微信
下载发烧友APP
电子发烧友观察
版权所有 © 湖南华秋数字科技有限公司
电子发烧友 (电路图) 湘公网安备 43011202000918 号 电信与信息服务业务经营许可证:合字B2-20210191