ESP8266中断和ISR不在IRAM中是怎么回事？

添加了 ICACHE_RAM_ATTR，但我仍然收到错误。我还应该修复什么？安装了 8MB、Arduino 1.8.9 和开发板库 2.5.2 的 ESP-12F。代码：

代码：全选#define ICACHE_RAM_ATTR
const byte interruptPin = 13;
volatile byte interruptCounter = 0;
int numberOfInterrupts = 0;

void setup() {

  Serial.begin(115200);
  pinMode(interruptPin, INPUT_PULLUP);
  attachInterrupt(digitalPinToInterrupt(interruptPin), handleInterrupt, RISING);

}

void ICACHE_RAM_ATTR handleInterrupt() {
  interruptCounter++;
}

void loop() {

  if(interruptCounter>0){

      interruptCounter--;
      numberOfInterrupts++;

      Serial.print("An interrupt has occurred. Total: ");
      Serial.println(numberOfInterrupts);
  }

}

错误：
代码：全选20:08:22.329 -> Abort called
20:08:22.329 ->
20:08:22.329 -> >>>stack>>>
20:08:22.329 ->
20:08:22.329 -> ctx: cont
20:08:22.329 -> sp: 3ffffdb0 end: 3fffffc0 offset: 01b0
20:08:22.329 -> 3fffff60:  feefeffe 00000001 3ffee26c 3ffee2c4  
20:08:22.329 -> 3fffff70:  3fffdad0 00000001 3ffee26c 3ffee2c4  
20:08:22.329 -> 3fffff80:  3fffdad0 00000000 3ffee294 401003da  
20:08:22.329 -> 3fffff90:  feefeffe 00000000 3ffee294 40201069  
20:08:22.329 -> 3fffffa0:  feefeffe feefeffe feefeffe 402018b4  
20:08:22.329 -> 3fffffb0:  feefeffe feefeffe 3ffe84f4 401006c5  
20:08:22.329 -> <<
20:08:22.373 ->  ets Jan  8 2013,rst cause:2, boot mode:(3,6)
20:08:22.373 ->
20:08:22.373 -> load 0x4010f000, len 1384, room 16
20:08:22.373 -> tail 8
20:08:22.373 -> chksum 0x2d
20:08:22.373 -> csum 0x2d
20:08:22.373 -> v8b899c12
20:08:22.373 -> ~ld
20:08:22.431 -> ISR not in IRAM!