VEE可以从一个I/O设备收集数据，然后将其流式传输到另一个I/O设备吗？

你好Gregg C Levine之前我发现自己重新发明轮子我以为我会问问题。可以用VEE来收集来自一个I / O设备的数据，比如一个RS232port，然后将它流式传输到另一个吗？
显然，两个类似的设备会有不同的地址，以免混淆系统.--- Gregg C Levine hansolofalcon@worldnet.att.net ---“记住部队会和你在一起。永远。”
Obi-Wan Kenobi ---您目前订阅了vrf：r***@soco.agilent.com要订阅，请发送空白电子邮件请求“join-vrf@lists.it.agilent.com”。要取消订阅，请发送空白电子邮件至
“leave-vrf@it.lists.it.agilent.com”。要向此邮件列表发送邮件，请发送电子邮件至“vrf@agilent.com”。
如果您需要有关邮件列表的帮助，请发送邮件至“owner-vrf@it.lists.it.agilent.com”。在“www.oswegosw.com/vrf_archive/”上搜索“非官方vrf档案”。



     以下为原文

  Hello from Gregg C Levine
Before I find myself reinventing the wheel I thought I'd ask a
question.

Can VEE be used to collect data from one I/O Device, say an RS232
port, and then stream it to another? Obviously both devices while
similar would have different addresses to save confusing the system.
---
Gregg C Levine hansolofalcon@worldnet.att.net
---
"Remember the Force will be with you. Always." Obi-Wan Kenobi



---
You are currently subscribed to vrf as: [email=r***@soco.agilent.com]r***@soco.agilent.com[/email]
To subscribe send a blank email request to "join-vrf@lists.it.agilent.com".
To unsubscribe send a blank email to "leave-vrf@it.lists.it.agilent.com".
To send messages to this mailing list,  email "vrf@agilent.com". 
If you need help with the mailing list send a message to "owner-vrf@it.lists.it.agilent.com".
Search the "unofficial vrf archive" at "www.oswegosw.com/vrf_archive/".

>可以使用VEE从一个I / O设备收集数据，比如一个RS232>端口，然后将其流式传输到另一个端口吗？这几乎是任何程序所做的。-SHAWN ----您目前订阅的是vrf as
：r***@soco.agilent.com要订阅，请发送空白电子邮件请求“join-vrf@lists.it.agilent.com”。要取消订阅，请发送空白电子邮件至“leave-vrf@it.lists.it.agilent.com
“。要发送邮件到这个邮件列表，请发送电子邮件至”vrf@agilent.com“。
如果您需要有关邮件列表的帮助，请发送邮件至“owner-vrf@it.lists.it.agilent.com”。在“www.oswegosw.com/vrf_archive/”上搜索“非官方vrf档案”。



     以下为原文

  > Can VEE be used to collect data
> from one I/O Device, say an RS232
> port, and then stream it to another?

That's pretty much what any program does.
-SHAWN-



---
You are currently subscribed to vrf as: [email=r***@soco.agilent.com]r***@soco.agilent.com[/email]
To subscribe send a blank email request to "join-vrf@lists.it.agilent.com".
To unsubscribe send a blank email to "leave-vrf@it.lists.it.agilent.com".
To send messages to this mailing list,  email "vrf@agilent.com". 
If you need help with the mailing list send a message to "owner-vrf@it.lists.it.agilent.com".
Search the "unofficial vrf archive" at "www.oswegosw.com/vrf_archive/".

你好Gregg C Levine之前我发现自己重新发明轮子我以为我会问一个问题。可以用VEE来收集来自一个I / O设备的数据，比如一个RS232端口，然后将它传输到另一个吗？
显然，两个类似的设备会有不同的地址，以免混淆系统.--- Gregg C Levine hansolofalcon@worldnet.att.net ---“记住部队会和你在一起。永远。”
Obi-Wan Kenobi ---订阅发送空白电子邮件请求到“join-vrf@lists.it.agilent.com”。要取消订阅，请发送空白电子邮件至“leave-vrf@it.lists.it.agilent.com
“。要发送邮件到这个邮件列表，请发送电子邮件至”vrf@agilent.com“。
如果您需要有关邮件列表的帮助，请发送邮件至“owner-vrf@it.lists.it.agilent.com”。在“www.oswegosw.com/vrf_archive/”上搜索“非官方vrf档案”。



     以下为原文

  Hello from Gregg C Levine
Before I find myself reinventing the wheel I thought I'd ask a question.

Can VEE be used to collect data from one I/O Device, say an RS232 port, and then stream it to another? Obviously both devices while similar would have different addresses to save confusing the system.
---
Gregg C Levine hansolofalcon@worldnet.att.net
---
"Remember the Force will be with you. Always." Obi-Wan Kenobi



---
To subscribe send a blank email request to "join-vrf@lists.it.agilent.com".
To unsubscribe send a blank email to "leave-vrf@it.lists.it.agilent.com".
To send messages to this mailing list,  email "vrf@agilent.com". 
If you need help with the mailing list send a message to "owner-vrf@it.lists.it.agilent.com".
Search the "unofficial vrf archive" at "www.oswegosw.com/vrf_archive/".