如何从一个PSoC 4模块到另一个PSoC 4模块串行传输数据？

你好，
我想知道如何将数据从一个PSoC 4模块串行传输到另一个PSoC 4模块。PSOC 4模块都是CY8CKIT4248LQI-BL58.
我读到，我们可以通过两个设备来连接两个设备，一个是中央的，另一个是外围的。
所以，我的问题是如何通过这个BLE连接发送串行数据。
我想创建一个应用程序，这样当我按下第一个板上的一个按钮时，信号就被串行传输到另一个板上（我们可以看到，数据通过显示消息在第二个板的COM端口上接收），而第二个板上的LED何时闪烁。吨压在第一板上。
请提供方法和样品程序，如果有的话。
提前感谢。



     以下为原文
  Hi,

I want to know how can we transmit data serially from one PSoC 4 module to the other PSoC 4 module. Both the PSoC 4 modules are CY8CKIT4248LQI-BL583.

I read that we can connect two devices via BLE one being central the other being peripheral.
So, my question is how to send serial data through this BLE connection.

I want to create an application such that when I press a button on the first board the signal is transmitted serially to the other board (we can see that the data is received on terminal application on COM port of the second board, by displaying message) and the LED on the 2nd board blinks when button pressed on first board.

Please provide methods and sample programs if any.

Thanks in advance.