完善资料让更多小伙伴认识你,还能领取20积分哦, 立即完善>
嗨,我想使用模拟PSG和斜坡扫描选项进行以下测量。
通过产生两个间隔1MHz的音调并进行模拟斜坡扫描,使用两个PSG扫描IMD测量值。 我将PSG的o / p连接到我的设备,并在sectrum分析仪上测量设备的输出。 频率为6GHz和14GHz如何同步两个PSG同时开始扫描并同时结束? 我还需要触发频谱分析仪进行测量。我发现在PSG上,不同单位的扫描时间并不完全相同.Rgds 以上来自于谷歌翻译 以下为原文 hi, I would like to do the following measurement using the analog PSG with the ramp sweep option. 1. swept IMD measurements using two PSGs by generating two tones that are 1MHz apart and doing an analog ramp sweep. I connect the o/p of the PSG to my device and measure the output of the device on a sectrum analyzer. The frequencies are at 6GHz and 14GHz How do I synchronise the two PSGs to start the sweep at the same time and end at the same time? I also need to trigger the spectrum analyzer for the measurement. I find that on the PSG, the sweep times are not exactly the same for different units. Rgds |
|
相关推荐
|
|
只有小组成员才能发言,加入小组>>
2130 浏览 1 评论
1907 浏览 1 评论
1758 浏览 5 评论
2633 浏览 3 评论
将设备连接到PC并通过asic格式读取数据然后我的网络分析仪挂起
1598 浏览 4 评论
576浏览 1评论
关于Keysight x1149 Boundary Scan Analyzer
405浏览 0评论
N5230C用“CALC:MARK:BWID?”获取Bwid,Cent,Q,Loss失败,请问大佬们怎么解决呀
489浏览 0评论
2296浏览 0评论
1343浏览 0评论
小黑屋| 手机版| Archiver| 电子发烧友 ( 湘ICP备2023018690号 )
GMT+8, 2024-6-26 15:04 , Processed in 1.207719 second(s), Total 44, Slave 38 queries .
Powered by 电子发烧友网
© 2015 bbs.elecfans.com
关注我们的微信
下载发烧友APP
电子发烧友观察
版权所有 © 湖南华秋数字科技有限公司
电子发烧友 (电路图) 湘公网安备 43011202000918 号 电信与信息服务业务经营许可证:合字B2-20210191 工商网监 湘ICP备2023018690号