完善资料让更多小伙伴认识你,还能领取20积分哦, 立即完善>
嗨,
我正在以零速度控制我的PMSM。当我试图移动它的轴时,我不希望我的电机产生最大的扭矩以抵抗我的运动但是有限的一个。 经典控制一切都很顺利,但是一旦我试图限制它的扭矩 - 通过限制速度输出和Q电流PI控制器的某些较小值 - 电机开始旋转(?!)。 我真的不知道如何完成所描述的任务,通过限制PI控制器的输出来解决 有什么建议么? 提前致谢! 以上来自于谷歌翻译 以下为原文 Hi, I'm controlling my PMSM at zero speed. While I'm trying to move its shaft I don't want my motor to generate its maximum torque to resist my movement but the limited one. Everything went fine with classic control, but as soon as I tried to limit it's torque -- by limiting outputs of speed and Q-current PI controllers on some smaller values -- the motor started spinning (?!). I really have no idea how to accomplish described task, exept by limiting outputs of PI controlers Any suggestions? Thanks in advance! |
|
相关推荐
1个回答
|
|
Ciao user.user
我不认为限制Q电流PI是正确的,因为你只是限制Q轴上施加的电压(也许这就是电机开始旋转的原因)。 尝试使用MC API限制速度PI的输出(这通常有效)。 再见 梁咏琪 以上来自于谷歌翻译 以下为原文 Ciao user.user I don't think that limiting the Q-current PI is correct because in that whay you are just limiting the volatge applied in the Q axis (Maybe this is the reason why the motor start to spin). Try just to limit the output of the speed PI using the MC API (this usually works). Ciao Gigi |
|
|
|
只有小组成员才能发言,加入小组>>
请教:在使用UDE STK时,单片机使用SPC560D30L1,在配置文件怎么设置或选择?里面只有SPC560D40的选项
2396 浏览 1 评论
3120 浏览 1 评论
请问是否有通过UART连接的两个微处理器之间实现双向值交换的方法?
1686 浏览 1 评论
3503 浏览 6 评论
5858 浏览 21 评论
847浏览 4评论
1222浏览 4评论
在Linux上安装Atollic TRUEStudio的步骤有哪些呢?
488浏览 3评论
使用DMA激活某些外设会以导致外设无法工作的方式生成代码是怎么回事
1202浏览 3评论
1254浏览 3评论
小黑屋| 手机版| Archiver| 电子发烧友 ( 湘ICP备2023018690号 )
GMT+8, 2024-9-16 11:55 , Processed in 0.918569 second(s), Total 47, Slave 41 queries .
Powered by 电子发烧友网
© 2015 bbs.elecfans.com
关注我们的微信
下载发烧友APP
电子发烧友观察
版权所有 © 湖南华秋数字科技有限公司
电子发烧友 (电路图) 湘公网安备 43011202000918 号 电信与信息服务业务经营许可证:合字B2-20210191 工商网监 湘ICP备2023018690号