如何从PC主机上的FX3捕获数据

你好，普吉，
谢谢你的回答。这是我们的设置：图像传感器& lt；＝& gt；FPGA & lt；＝& gt；fx3& lt；＝& gt；PC。
我们正试图从FPGA捕获数据，并通过FX3发送到PC。但是，我们希望首先在FX3上生成哑数据，以确保我们可以转移到PCand并正确接收它们。从你的答案看来，我们可以修改控制中心来捕获从FX3发送到PC的数据，但是我们怎么能这样做呢？有什么教程或例子你可以指点我吗？我们如何在FX3上生成哑数据？
谢谢，
馥



     以下为原文
  Hello PRJI,
           Thank you for your answer. Here is our setup:             Image Sensor <=> FPGA <=> FX3 <=> PC
           We are trying to capture the data from the FPGA and send it to the PC through FX3. However, we want to generate dummy data first on the FX3 to make sure that we can transfer to PC and receive them correctly. From you answers, it appears that we can modify Control Center to capture the data sent to PC from the FX3, but how can we do so? Is there any tutorial or examples that you can point me to? And how can we generate dummy data on the FX3?
    Thanks,
    Phuc

你好，
我认为拖缆是你可以开始的最好的例子。在PC端从FX3到PC.的TRAPER示例泵0xAA，您需要在缓冲区中接收数据并显示它。
-普吉



     以下为原文
   Hi,
    I think Streamer is the best example you can start with. Streamer example pumps 0xAA from FX3 to PC. In the PC end you need to receive data in a buffer and display it.
    -PRJI

你好，普吉，
谢谢你的回复。我一直在玩与SDK给出的示例代码一段时间。不管怎样，我可以合并USBDebug into USBBulkLoopAutoManyToOne吗？我已经尝试了几天。该项目可以建立，但是，FX3没有出现在控制中心后，IMG上加载。我已经把源代码和这个帖子包含在一起了，你能看一下，告诉我哪里搞砸了吗？
http://PASTBIN COM/FGXRK9ZQ（CyfxBulkPautoMytotoOn.c）
http://PASTBIN COM/KYUVB9C（CyfxBulkPautoMangytoOne）
http://PaSTBIP.COM/7SBB9G2E（CyfxBulkPDSCR.C）
谢谢您。PUC P/S：我在USB 2上运行，所以我没有修改CyfxBulkPDSCR.C文件中的UB3.0节。



     以下为原文
   Hello PRJI,
                   Thank you for your reply. I have been playing around with the example codes given with the SDK for a while now. Is there anyway I can incorporate the USBDebug into USBBulkLoopAutoManyToOne? I have attempted to do so for a couple days. The project can be built; however, the FX3 doesn't appear in the Control Center after the img was loaded on it. I have included the source code along with this post, can you take a look and show me where I mess up? 
    http://pastebin.com/Fgxrk9ZQ (cyfxbulklpautomanytoone.c)
    http://pastebin.com/kiNUvB9C (cyfxbulklpautomanytoone.h)
    http://pastebin.com/7SBB9g2e (cyfxbulklpdscr.c)
         Thank you.   
         Phuc   
        
P/s: I'm running on USB 2.0 so I didn't modify the USB3.0 section in the cyfxbulklpdscr.c file.   
            
            

嗨，请尝试建立你的主机应用程序，首先从FX3接收数据并显示。附加固件泵0xAA到PC。你也可以试试这个控制中心。-普吉



     以下为原文
          Hi, Please try to build your Host app first, which receives data from FX3 and displays. Attached firmware pumps 0xAA to PC. You can try this in control center as well. -PRJI