怎么调试CYRF69103最佳

目前我正在使用一个使用CYYF69103的项目，需要对PIN赋值进行一些更改，并对生成的C代码进行更改。在这一点上，我已经调整了代码，并希望调试，但需要确定什么是最佳的调试方法，这种类型的芯片。
在电路仿真开发套件中有使用CY32—15 DK的选择，但是我的芯片类型没有在这个CyPress链接上列出；
HTTP://www. CyPress？COM/？RID＝3411我已经查看和读取PSoC 1调试选择器工具包指南，也没有看到那里列出的CYF69103。在CYF69103 PROP LP的搜索中，调试一次只显示了1次，在该实例中没有详细的信息。PSoC设计器模块3：用PSoC 1进行调试不按主题索引，但目前正在寻找更多信息。在这个特定的芯片中是否有一些调试功能可以与IDE一起使用？在这种情况下，如何使用CYFR99103调试代码？提前感谢！



     以下为原文
  Currently I am working on a project using the CYRF69103 and need to make some changes to the pin assignments, and make changes to the generated C code.  At this point I have adjusted the code and want to debug, but need to determine what is the optimal method of debugging for this type of chip.
    There is the option of using the CY3215-DK In-Circuit Emulation Development Kit, but my chip type is not listed on this Cypress link;
        http://www.cypress.com/?rID=3411   
            
        I have viewed and read the PsoC 1 Debug Selector Kit Guide and did not seen the CYRF69103 listed there either. The term debugging only shows up 1 time in a search of the .pdf file for the CYRF69103 PRoc LP, and there was no detailed information in that instance. The      PSoC designer module 3:debugging with psoc 1   is not indexed by topic, but am currently looking there for more information.   
            
        Are there some debug features are built in to this specific chip that I can use with the IDE?   
            
        In this situation how does one debug code using the CYRF69103?   
            
        Thanks in Advance!