不能把代码编程到第一触动启动器

大家好，
我已经安装了PSOC创建者1和创建者2在我的PC，这是与Windows 7一起工作。但是，当我试图用创建者1编程我的代码时，它成功地编程了…但是当我尝试与创建者2。O时，我不能把我的代码编程到第一触动启动器（CY8CITK-03）套件…
基本上，当我试图让我的LED连接到P2（0）的第一触控套件发光…我不能使用创建者1，因为没有在其组件列表中的PIN……但通过使用创建者2，我能够写程序发光二极管连接到P2（0）的第一触摸套件，由于引脚的存在在创建者2的组件列表中，但即使它成功构建，当我尝试对它进行编程时，它也要求选择目标设备……当我选择目标设备并单击“OK”时，它在窗口的左下角显示“准备就绪”消息……这是否混淆了它？程序或不…如果我确信它是编程的……我的LED并没有按照我的代码闪烁……无论如何，我都没有得到“程序成功完成”的消息。



     以下为原文
  hi to all,
             i have installed both psoc creator 1.0 and creator 2.0 in my pc which is working with windows 7. But, when i tried to program my code with creator 1.0, it is programming successfully...but the same when i trying with creator 2.o i couldnt program my code to first touch starter (CY8cKIT-003) kit....
    basically, when i tried to make my LED connected to P2[0] of first touch kit to glow....i am unable to use creator 1, because of not having pins in its component list....but by using creator 2.0 i am able to write the program to glow led connected to p2[0] of first touch kit due to presence of pins in the component list of creator 2.0, but eventhough it builds successfully,  when i tried to program it, it is asking to select the target device...when i select the target device and click "ok" then it is showing "ready" message at the down left corner of window.....which is confusing whether it programmed or not....if i convinced myself it as programmed....my LED is not blinking as per my code.......any way iam not getting that "program successfuly completed" message.