怎么使用Mini Eval 1和ICE cube进行设备编程

HI开发者，
我正在尝试使用CY32 10 MiVale1板（过时的一个）来编程DIP PSoC设备。ISSP信号来自冰块。谁能告诉我，我正在尝试的方式是正确的吗？配置在我所连接的是PC ----------- >；冰块---------------- >；cy3210 minieval 1板。
只有冰块是由外部电源供电的。我只是试图连接的PSoC Designer软件对冰块，但它说“不能检测POD”。请让我知道是否我用的软件是正确的或不。其实我已经安装了PSoC编程软件但我不能使用它在一个单独的时尚，我想它作为一个添加为PSoC Designer。



     以下为原文
   hi developers,
                        I am trying to program a DIP PSoC device using a CY3210 MiniEval1 board (an obsolete one). The ISSP signals are derived from ICE cube. can any one tell me whether the way i am trying to program is correct. The configuration in which i have connected is as follows    PC-----------> ICE cube ---------------->CY3210 MiniEval 1 board .
     Only the ICE cube is powered from an external source. i am just trying to connect the PSoC designer software to the ICE cube but it says "could not detect the Pod". Please let me know whether the software i am using is correct or not. Actually i have installed a PSoC programmer software but i couldn't use it in a stand alone fashion and i suppose it works as an add on for PSoC designer.