在WinXP SP3上连接后SpinFamily崩溃

你好，

在三个不同平台上运行Windows XP sp3时，我发现''SPINFamily评估软件'出现错误。
我能够让软件在Windows 7平台上运行，所以我有理由相信我正在启动所有内容并且我的硬件没问题。
一旦我连接到电路板，我就看到了崩溃。

细节：
Windows XP sp3系统[Windows NT 5.1 Build：2600]
.Net 4.0 [全新.NET 4.0安装，全新sp3安装]
SPINFamily评估软件（选择L6480）[全新安装]


根据Spin窗口底部的消息，电路板确实连接了：
板连接（BR_4MHz）FW版本0.0

这与我在Windows 7系统上看到的相匹配，我用它来验证我的硬件是否正常。

仔细查看错误报告：

EventType：clr20r3 P1：gui.exe P2：1.2.5071.18356 P3：528b2b58
P4：mscorlib P5：2.0.0.0 P6：471ebc5b P7：1295 P8：14
P9：system.missingmethodexception

有没有办法解决这个错误？

谢谢，
- 查尔斯


#cspin



以下为原文




Hello,

  I am seeing a error with the ''SPINFamily Evaluation Software'' when running on Windows XP sp3 on three different platforms.
I was able to get the software to operate on a Windows 7 platform, so I am reasonably confident that I am starting up everything correctly and that my hardware is okay.
I see a crash as soon as I connect to the board.

Details:
Windows XP sp3 system [Windows NT 5.1 Build: 2600]
.Net 4.0 [fresh .NET 4.0 install, fresh sp3 install]
SPINFamily Evaluation Software (L6480 selected) [fresh install]


According to the message at the bottom of the Spin window the board did connect:
Board connected (BR_4MHz) FW Version 0.0

This matches what I saw on a windows 7 system that I used to validate that my hardware was okay.

Looking a little closer at the error report:

EventType : clr20r3     P1 : gui.exe     P2 : 1.2.5071.18356     P3 : 528b2b58
P4 : mscorlib     P5 : 2.0.0.0     P6 : 471ebc5b     P7 : 1295     P8 : 14      
P9 : system.missingmethodexception      

Is there a way around this error?

Thank you,
- Charles.


  
#cspin