完善资料让更多小伙伴认识你,还能领取20积分哦, 立即完善>
嗨,我正在使用由7到8个仪器组成的设置,通过GPIB通过Agilent 82357B(USB / GPIB接口)连接到PC。
它之前一直很好,但是当我从假期回来时,我再也无法工作了。 导致的失败一直是红色的。 故障似乎与82357B本身有关,因为我在不同的PC上尝试了适配器而没有运气。 已将IO库重新安装到最新版本,断开所有仪器,重启几次等等。我再也不会变绿了。 在我缺席期间,我唯一知道的事情是17个新的Windows更新(Win 7)。 这是我在软件方面唯一可以想到的可能影响的东西。 我想这是硬件或硬件。 然而,据我所知,没有其他人触及过这个设置,所以很奇怪..任何有类似经历的人? 所有的帮助表示赞赏,因为这是紧急的。 以上来自于谷歌翻译 以下为原文 Hi, I'm using a setup consisting of 7-8 instruments connected through GPIB to a PC via an Agilent 82357B (USB/GPIB Interface). It has always worked fine before, but when I got back from my vacation I can't get it to work any more. The fail led is constantly red. The fault seem to be with the 82357B itself, as I have tried the adapter on a different PC with no luck. Have reinstalled the IO Libraries to latest version, have disconnected all instruments, rebooted several times etc. I just won't turn green again. The only thing I know happend during my absence was 17 new Windows updates (Win 7). That's the only thing I can think of on the software side that possibly could affect. It's either that or broken hardware I guess. However, no one else has touched the setup either as far as I know so it's strange.. Anyone with similar experience? All help is appreciated as this is urgent. |
|
相关推荐
7个回答
|
|
如果您已经尝试过另一台带有最新IO库的PC,那听起来就像是硬件故障。
我会联系您当地的联络中心,看看他们对硬件更换的看法。 获取当地联络中心号码的最简单方法是访问[www.agilent.com/find/contactus]并选择支持专家选项卡。 以上来自于谷歌翻译 以下为原文 If you've already tried another PC with the latest IO Libraries, it sounds like hardware failure. I'd contact your local Contact Center and see what they say about hardware replacement. The easiest way to get your local Contact Center number is to visit [www.agilent.com/find/contactus] and select the Support Specialist tab. |
|
|
|
MAX_zuo 发表于 2019-2-27 09:07 也许是的,但我认为另一台PC也有从7月开始的那些最新的胜利更新...但如果没有其他人报告任何错误,那么我认为这是硬件故障。 以上来自于谷歌翻译 以下为原文 Yes perhaps, but I think the other PC also had those latest win updates from July... But if no one else has reported any errors with those then I suppose it's hardware failure. |
|
|
|
我有几台PC运行最新的更新,我没有看到任何这样的行为。 以上来自于谷歌翻译 以下为原文 I have several PC's running with the latest updates, and I haven't seen any behavior like this. |
|
|
|
我还没有听说过任何其他由Windows更新引起的类似行为的报告。 Alan Copeland IO库支持安捷伦 以上来自于谷歌翻译 以下为原文 I also haven't heard of any other reports of similar behavior caused by Windows Updates. Alan Copeland IO Libraries Support Agilent |
|
|
|
我只是通过运行系统还原并回滚到更新前的点来使其工作。 因此,这不是硬件故障,必须与这些更新或其他一些客户端更新。已尝试在2台PC上进行更新,但没有人会识别或注意插入的USB设备,而没有 他们做的更新。 以上来自于谷歌翻译 以下为原文 I just got it to work by running system restore and roll back to the point before the updates. So it wasn't an hardware fault, must have been something with those updates or some other client update.. Have tried on 2 PCs with the updates and none of them would even recognize or notice the plugged in USB-device, whereas without the update they do. |
|
|
|
分会看见我呢看 发表于 2019-2-27 10:03 哇,好的。 你能给我发一份更新清单,以便我查一下吗? 此外,如果你有机会,你应该逐个重新申请,看看哪一个打破了连接。 以上来自于谷歌翻译 以下为原文 Wow, ok. Can you send me a list of the updates so I can check them? Also, if you get a chance you should reapply them one by one and see which one breaks the connection. |
|
|
|
现在这很奇怪..我一个接一个地重新应用所有更新,这次它有效。
仍有可能还有一些其他非Windows客户端更新被推出,现在已经丢失了。 哦,只要现在有效,我很高兴。 以上来自于谷歌翻译 以下为原文 Now that's weird.. I reapplied all updates one-by-one and this time it works. Still possible there were some other non-windows client update pushed out that's missing now. Oh well, I'm happy as long as it works now. |
|
|
|
只有小组成员才能发言,加入小组>>
1287 浏览 0 评论
2375 浏览 1 评论
2194 浏览 1 评论
2064 浏览 5 评论
2951 浏览 3 评论
1111浏览 1评论
关于Keysight x1149 Boundary Scan Analyzer
753浏览 0评论
N5230C用“CALC:MARK:BWID?”获取Bwid,Cent,Q,Loss失败,请问大佬们怎么解决呀
926浏览 0评论
1287浏览 0评论
小黑屋| 手机版| Archiver| 电子发烧友 ( 湘ICP备2023018690号 )
GMT+8, 2024-12-24 09:53 , Processed in 1.447418 second(s), Total 58, Slave 52 queries .
Powered by 电子发烧友网
© 2015 bbs.elecfans.com
关注我们的微信
下载发烧友APP
电子发烧友观察
版权所有 © 湖南华秋数字科技有限公司
电子发烧友 (电路图) 湘公网安备 43011202000918 号 电信与信息服务业务经营许可证:合字B2-20210191 工商网监 湘ICP备2023018690号