Arch Linux上的Vivado 2018.2安装程序挂断

对于那些可能在Arch Linux上尝试Vivado 2018.2的人来说，请快速注意......
我的设置：
Arch安装自2018.06.01 ISOGraphical环境使用Xorg和Xfce4AMD Ryzen 5 2400G，华硕PRIME B350M-E主板，2x8GB DDR4,250GB M.2 + 2x1TB硬盘在RAID1感谢@patocarr和他关于2018.1与Fedora 28的问题的帖子。我
遇到安装问题，安装文件安装完成但安装程序在生成已安装部件列表时会挂起，安装日志的最后一行除安装程序试图调用Vivado二进制文件之外没有显示多少
Tcl脚本生成已安装的设备列表。
尝试运行Vivado（没有设置settings64.sh，只是尝试执行二进制文件/opt/Xilinx/Vivado/2018.2/bin/vivado）为缺少的共享库抛出了消息，并进入了一个带有交互式提示的模式。
这可能是安装程序挂断的原因。
为libtinfo版本6创建链接，寻找版本5的可执行文件解决了该问题，并且安装工作在第二次尝试。
在设置WebPACK许可证之后，我能够为ZC702制作一个示例项目并通过实现来运行它。
我已经在使用Xorg而不是Wayland;
到目前为止还没有像@patocarr那样的综合问题。
-约旦



以下为原文

Just a quick note to those that might try Vivado 2018.2 on Arch Linux...

My setup:

• Arch installed from 2018.06.01 ISO
• Graphical environment using Xorg and Xfce4
• AMD Ryzen 5 2400G, ASUS PRIME B350M-E mobo, 2x8GB DDR4, 250GB M.2 + 2x1TB HDD in RAID1
  

Thanks to @patocarr and his post on issues with 2018.1 with Fedora 28.  I encountered an issue with the install where the installation of files would complete but the installer would hang when generating the list of installed parts, and the last line the install log didn't show much other than the installer tried to call the Vivado binary with a Tcl script to generate the installed devices list.  Attempting to run Vivado (no sourcing of settings64.sh, just attempting to execute the binary /opt/Xilinx/Vivado/2018.2/bin/vivado) threw the message for the missing shared library and entered an mode with an interactive prompt.  This is probably why the installer was hung up.  Creating the link to libtinfo version 6 for executables looking for version 5 solved that issue and the install worked on a second attempt.  After setting up the WebPACK license, I was able to make an example project for the ZC702 and run it through implementation.  I was already using Xorg instead of Wayland; so far no synthesis issues like @patocarr encountered.
-Jordan