怎么用steval IFN003v1控制电机

你知道我在哪里可以找到这份文件吗？
“STM32 PMSM MC Library v3.0快速入门指南”（UM1080）''？
 
 
 谢谢



以下为原文





Do you know where I can find the document ''
The 'Quickstart guide for STM32 PMSM MC Library v3.0' (UM1080)'' ?

  
Thank you

Ciao Jean
 
 
 首先，我想说（目前），http：//www.st.com/internet/com/SOFTWARE_RESOURCES/SW_COMPONENT/FIRMWARE/stm32_pmsm_nrnd_fwlib.zip支持IFN003V1
 通过适当的http://www.st.com/internet/com/SOFTWARE_RESOURCES/SW_COMPONENT/FIRMWARE/steval-ifn003v1_fw_patch.zip
。
 http://www.st.com/internet/com/SOFTWARE_RESOURCES/TOOL/CONFIGURATION_UTILITY/motorcontrol_workbench.zip
 还支持Library v3.0。
 
 重新定义''STM32 PMSM MC Library v3.0的'快速入门指南'，您可以在将DOC3文件夹中的v3.0安装后进行修改。
 
 
 此外，在FOC Lib。 v3.2在Project / main.c中实现了一个简单的演示代码，其中使用了一些基本功能，如启动/停止或设置电机速度。您可以将其作为起始点，然后您可以查看DOC文件夹中存在的剩余配置。
 
 再见
 梁咏琪



以下为原文





Ciao Jean


First of all I want to say that (for the moment) the IFN003V1 is supported by http://www.st.com/internet/com/SOFTWARE_RESOURCES/SW_COMPONENT/FIRMWARE/stm32_pmsm_nrnd_fwlib.zip
by means of the proper http://www.st.com/internet/com/SOFTWARE_RESOURCES/SW_COMPONENT/FIRMWARE/steval-ifn003v1_fw_patch.zip
.
The http://www.st.com/internet/com/SOFTWARE_RESOURCES/TOOL/CONFIGURATION_UTILITY/motorcontrol_workbench.zip
supports also the Library v3.0.

Regrading the ''The 'Quickstart guide for STM32 PMSM MC Library v3.0', you can fint it after installing the v3.0 in the DOC folder.

  
Moreover in the FOC Lib. v3.2 is implemented a simple demo code inside the Project/main.c in which are used some basic functions like Start/Stop or set motor speed. You can thake it as starting point and then you can take a look at the remaining domumentation present in the DOC folder.
  
Ciao
Gigi

谢谢 ，
 
 我已经在Iar上测试了，我又有一个问题。编译时没有steval-ifn003v1。只是stm32100b，100e，....当我查看数据表时，我看到''STM32F10E-EVAL''是单电机驱动的goog。
 
 对于steval ifn003v1，可以使用''STM32F10E-EVAL'进行编译吗？
 
 谢谢



以下为原文







Thank you ,

I have tested on Iar, I have again one question. There is not steval-ifn003v1 for compilation. Just stm32100b , 100e, .... When I look in datasheet, I see ''STM32F10E-EVAL'' is goog for single motor drive.

Can compile with ''STM32F10E-EVAL'' for steval ifn003v1 ?

Thank you

Ciao Jean，
 
 你必须选择STM3210B-EVAL。
 
 请仔细阅读UM1478，特别关注第5.3段。
 在使用Workbench生成.h文件后，不要忘记在工作区中批量构建所有项目。
 
 再见
 梁咏琪



以下为原文





Ciao Jean,

you have to select the STM3210B-EVAL.

Pleae read carefully the UM1478 with special focus on paragraph 5.3.
And do not forget to make a batch build of all the projects in the workspace after having generated the .h files with the Workbench.

Ciao
Gigi

感谢您的帮助



以下为原文





Thank you for your help