怎么设置IFN003V1的工作？

我正在尝试开始使用IFN003V1板。

我是STMicro软件工具和评估板的新手。

我找不到MC库的V3.0，所以我安装了V3.2。我没有找到IFN003V1项目，因此我尝试将IFN003V1贴片应用于3.2 MC库。修补程序详细信息报告“无需修补”。

我随后找到了MC库V3.0的链接，所以我卸载了V3.2并安装了V3.0。当我试图安装IFN003V1补丁时，我收到错误'无法打开crosscheck.h'，我发现crosscheck.h丢失了。然后我忽略了错误并继续修补。修补程序详细信息报告它无法打开其他几个文件，似乎没有修补任何内容。 （该补丁是从V3.0 MC库的安装文件夹运行的。）

我需要做些什么来设置IFN003V1的工作？
MC Library V3.2是否已经有针对V3.0的IFN003V1补丁中的更改？
如果没有，那么为了修补V3.0我需要做什么？
如果设置正确，我在哪里可以找到IFN003V1项目？

谢谢你的帮助，
插口


＃3.2＃ifn003v1＃mc-libr-3.0



以下为原文




I'm attempting to get started with an IFN003V1 board.

I am new to STMicro software tools and eval boards.

I could not find V3.0 of the MC Library, so I installed V3.2.  I didn't find an IFN003V1 project, so I attempted to apply the IFN003V1 patch to the 3.2 MC Library.  The patch details reported 'nothing to patch'.

I subsequently found the link to V3.0 of the MC Library, so I uninstalled V3.2 and installed V3.0.  When I attempted to install the IFN003V1 patch I got an error 'can't open crosscheck.h' and I found that crosscheck.h was missing.  I then ignored the error and proceeded with the patch.  The patch details reported that it could not open several other files and it appears that nothing was patched.  (The patch was run from the installation folder of the V3.0 MC Library.)

What do I need to do to get set up for work on the IFN003V1?
Does MC Library V3.2 already have the changes that are in the IFN003V1 patch for V3.0?
If not, then what do I need to do in order to patch V3.0?
When things are set up properly, where will I find an IFN003V1 project?

Thanks for any help,
Jack

  
#3.2 #ifn003v1 #mc-libr-3.0