lsm9ds1如何自检

你好，
它也不是ST的“官方”信息，但我正在研究LSM9DS1，而对于磁力计自检，我使用的是LIS3MDL磁力计的程序。我用于磁力计的程序在下面解释
/external-link.jspa?url=http%3A%2F%2Fwww.st.com%2Fresource%2Fen%2Fapplication_note%2Fdm00136626.pdf
。不幸的是，LSM9DS1磁力计和LIS3MDL测试结果的范围可能不同。我在这个论坛上问了一个问题：
https://community.st.com/0D50X00009XkXStSAN
回复中还有一些提示：
https://community.st.com/message/10108
 不幸的是，正如评论中所提到的，如果我们必须采取差异'NOST_DATA - ST_DATA'或'，我也不清楚
ST_DATA - NOST_DATA'
 检查标志。
最好，
大卫
 
 注意：原始帖子包含大量线程对话，只能迁移到第9级



以下为原文




Hello,
It is also not 'official' information from ST, but I am working on LSM9DS1, and for the magnetometer self-test I am using the procedure of the LIS3MDL magnetometer. The procedure I am using for the magnetometer is explained in the
/external-link.jspa?url=http%3A%2F%2Fwww.st.com%2Fresource%2Fen%2Fapplication_note%2Fdm00136626.pdf
. Unfortunately, it is possible that the ranges for testing the results are different between the LSM9DS1 magnetometer and the LIS3MDL. I asked on this forum a question about that:
https://community.st.com/0D50X00009XkXStSAN

There is also some hints in the response to:
https://community.st.com/message/10108
Unfortunately, as mentioned in a comment, it is not clear also for me if we have to take the difference 'NOST_DATA - ST_DATA' or '
ST_DATA - NOST_DATA'
to check the sign.


Best,


David

Note: the original post contained a large number of threaded conversations and was only able to be migrated to the 9th level

对不起，自测程序无法在论坛上分享。
在自检期间，传感器不能运动。
自测期间的位置无关紧要。



以下为原文




I'm sorry, the self-test procedure cannot be shared on the forum.
The sensor can't be in motion during the self-test.
The position during the self-test doesn't matter.

大家好，
david.meignan
is是正确的，上次官方信息证实LSM9DS1内部的磁力计正好是LIS3MDL，您可以使用http://www.st.com/content/ccc/resource/technical/document/application_note/69/d7/05/fe /a9/3e/4b/ea/DM00136626.pdf/files/DM00136626.pdf/jcr:content/translations/en.DM00136626.pdf
 用于LSM9DS1磁力仪自测包括极限。
问候，
切赫
 
 注意：原始帖子包含大量线程对话，只能迁移到第9级



以下为原文




Hello all,

david.meignan
‌ is correct, last official information confirmed that magnetometer inside LSM9DS1 is exactly LIS3MDL and you can use http://www.st.com/content/ccc/resource/technical/document/application_note/69/d7/05/fe/a9/3e/4b/ea/DM00136626.pdf/files/DM00136626.pdf/jcr:content/translations/en.DM00136626.pdf
for LSM9DS1 magnetometer selftest including the limits.

Regards,

Petr

Note: the original post contained a large number of threaded conversations and was only able to be migrated to the 9th level