如何分析拥堵报告？

@ M006，
那是拥挤的窗户的方向。
在GUI中打开report_design_analysis以查看设备视图中的窗口。
打开实施的设计并选择工具 - >报告 - >报告设计分析。
请查看第120页的“拥塞报告”＆amp;
139以下用户指南：
https://www.xilinx.com/support/documentation/sw_manuals/xilinx2017_4/ug906-vivado-design-analysis.pdf#page=139
检查以下答复记录以调试拥塞：
https://www.xilinx.com/support/answers/66314.html
--Syed
--------------------------------------------------
-------------------------------------------请注意 - 请标记答案
如果提供的信息有用，请“接受为解决方案”。给予您认为有用并回复导向的帖子。感谢Kudos .------------------------
--------------------------------------------------
-------------------



以下为原文

@m006,
 
That is the direction of the congested window. Open report_design_analysis in GUI to see the window in device view. 
Open implemented design and select Tools-->Report-->Report Design Analysis. 
 
Please check "Congestion Report" at page 120 & 139 in below User guide:
https://www.xilinx.com/support/documentation/sw_manuals/xilinx2017_4/ug906-vivado-design-analysis.pdf#page=139
 
Check the following Answer record to debug the congestion: 
https://www.xilinx.com/support/answers/66314.html
 
--Syed
---------------------------------------------------------------------------------------------
Kindly note- Please mark the Answer as "Accept as solution" if information provided is helpful.

Give Kudos to a post which you think is helpful and reply oriented.
---------------------------------------------------------------------------------------------

为什么我不能从报告设计分析中获得拥塞信息？



以下为原文

why can't i get the congestion information from the  Report Design Analysis?

嗨@ m006。
从附加图像中，当前选择了放置最大拥塞度量。
初始估计路由器拥塞将表示从实现日志中看到的内容，尽管表示可能存在一些差异。



以下为原文

Hi @m006. From the attached image, the Placed Maximum congestion metric is currently selected. The Initial Estimated Router Congestion would represent what is seen from the implementation log, although there might be some differences in representation.