Cysmart CY5677不支持的设备

你好，
我刚买的cy5677 cysmart BLE 4.2子适配器与cy8c4248lqi-bl583。当我进入我的电脑运行cysmart 1.2，它表明不支持的设备。
我点击重置按钮，但它仍然显示不支持的设备。我随后显示在cysmart描述了PSoC的程序员的编程固件，但它显示：
错误：HEX文件不与获取的设备匹配，请检查装置。
我只有在cysmart文件夹的ble_4_2_dongle_cysmart_256k.hex cy5677。我不确定这是否是正确的十六进制文件。如果不正确，我在哪里可以得到正确的HEX文件？
CysPrime03.PNG
2.3兆字节
CysPrime01.PNG
53.6 K
CyPress
21.7 K



     以下为原文
  Hi,

I just bought the CY5677 Cysmart BLE 4.2 SUB Dongle with cy8c4248lqi-bl583. When I plug into my computer and run the Cysmart 1.2, it shows unsupported device.
I have clicked reset button but it still shows unsupported device. I then followed the description shown in Cysmart and went to PSoC Programmer to program the firmware but it shows:

ERROR: The hex file does not match with the acquired device, please check the device.

I only have the BLE_4_2_Dongle_CySmart_256K.hex in Cysmart folder for CY5677. I am not sure if this is the correct hex file. If not correct, where can I get the correct hex file?

•   Cypress_03.PNG 2.3 MB
•   Cypress_01.PNG 53.6 K
•   Cypress_00.PNG 21.7 K