CYBT-343026-EVAL如何在调试UART中显示BT设备的接收数据？

问候语，
经过与其他蓝牙连接蓝牙模块较好地功能的设备，如Android手机或PC能够将数据发送到他们通过SPP，我正在试图从这些设备发送消息的模块。
我会定期发送模块以十六进制格式字节（0x10）从我的电话。
在UART调试我发现所有的回调函数被称为预期。然而，“wiced_bt_trace（“spp_data_cb：%x，%dn”，p_data，Len）；“内”hci_control_spp_rfcomm_data_callback”功能给每一个不同的值为“p_data”领域。
因为我总是发送相同的信息，它不应该是相同的每一次吗？
我希望能够显示的字节的值由模块接收。我该怎么办呢？
先谢谢你。
当做。



     以下为原文
  Greetings,

After having sucessfuly connected the bluetooth module with other bluetooth enabled devices such as an android phone or a PC and being able to send data to them via SPP, I am currently trying to send messages from these devices to the module.

I am periodically sending the module a byte in hexadecimal format (0x10) from my phone.

In the debug UART I see that all the callback functions are called as expected. However, the "WICED_BT_TRACE("   spp_data_cb: %x, %d n", p_data, len );" inside the "hci_control_spp_rfcomm_data_callback" function gives everytime a different value for the "p_data" field.

Since I'm always sending the same message, shouldn't it be the same everytime?

I'd like to be able to display the exact value of the byte received by the module. Any idea on how could I do it?

Thank you in advance.

Regards.