[问答]

HP 8753C A3 SOURCE问题

问答对人有帮助，内容完整，我也想知道答案 0 亲爱的同事们，您好！我的HP 8753C网络分析仪出现问题。 F / W版本：04.13。选项：NONE第一个问题是A3 Source。我尝试检查服务手册中“源组故障排除”的“A3 SOURCE AND A11 PHASE LOCK CHECK”的输出。我发现只有3.8 GHz -40 dBm的信号，略有几MHz的跳频。该信号与VNA的预调频率无关。除了3.8 GHz之外我没有看到任何其他谐波：在它之后我测量了腔体振荡器的信号并获得了具有更多功率的3.8 Ghz信号：大约+10 dBm。因此腔体振荡器功能正常。我还检查了YTO振荡器并没有看到任何信号。我检查了所有电源轨，看起来很好。所以我认为问题是有缺陷的YTO。问题是如何在没有YTO的情况下测试A3 SOURCE模块的其他部分？我尝试将0-3GHz 0dBm信号从发生器应用到A3 SOURCE而不是YTO，并在VNA的RF OUT端口用SA测量信号。我可以看到来自发电机的信号，但也有很多谐波：100 MHz 0 dBm 500 MHz 0 dBm 1000 MHz 0 dBm 2000 MHz 0 dBm 3000 MHz 0 dBm是正常还是只能看到一个谐波来自发电机？据我了解，我看到谐波混合组件。它们应该在A3放大器中滤除吗？谢谢所有回复的人！以上来自于谷歌翻译以下为原文 Hello dear colleagues! I have problems with my HP 8753C network analyzer. F/W version: 04.13. Options: NONE The first problem is A3 Source. I tried to check the output regarding to "A3 SOURCE AND A11 PHASE LOCK CHECK" of Source Group Troubleshooting found in service manual. And I found out only 3.8 GHz -40 dBm signal with slightly several MHz frequency hopping. This signal is independent of pretune frequency of VNA. I did not see any other hARMonics except 3.8 GHz: After it I measured the signal of Cavity oscillator and got the 3.8 Ghz signal with much more power: about +10 dBm. So the Cavity oscillator is functional. Also I checked YTO oscillator and did not see any signal. I checked all power rails and they looks good. So I think the problem is defective YTO. The question is how I can test other parts of A3 SOURCE module without YTO? I tried to apply 0-3GHz 0dBm signal from generator to A3 SOURCE instead of YTO and measured signal with SA at RF OUT port of VNA. I can see the signal from generator, but there are many harmonics as well: 100 MHz 0 dBm 500 MHz 0 dBm 1000 MHz 0 dBm 2000 MHz 0 dBm 3000 MHz 0 dBm Is it normal or should I see only one harmonic going from generator? As I understand it I see harmonic mixing components. Should they be filtered in the amplifier of A3? Thank you to everyone who will respond! 0
2018-10-10 17:17:17　　评论淘帖0 邀请回答您可以邀请以下用户，快速回答问题 × kingnet_52040 该类别下有 195 个回答。邀请回答 60user7 该类别下有 81 个回答。邀请回答蓝色冰汐该类别下有 45 个回答。邀请回答醉狼工作室该类别下有 41 个回答。邀请回答 ianwhoani 该类别下有 30 个回答。邀请回答 dkhwakd 该类别下有 25 个回答。邀请回答 aaabbb567 该类别下有 23 个回答。邀请回答 e08506806 该类别下有 20 个回答。邀请回答 szzjfyp 该类别下有 18 个回答。邀请回答 sonia87 该类别下有 16 个回答。邀请回答 ningee 该类别下有 16 个回答。邀请回答 xj5548 该类别下有 15 个回答。邀请回答 zouqinxiang 该类别下有 15 个回答。邀请回答 daichuangs 该类别下有 14 个回答。邀请回答 derek88 该类别下有 14 个回答。邀请回答 JST2006 该类别下有 12 个回答。邀请回答 hzmbs2016 该类别下有 12 个回答。邀请回答 hu_wflllllllg21 该类别下有 11 个回答。邀请回答 fichesw 该类别下有 11 个回答。邀请回答 www037 该类别下有 11 个回答。邀请回答举报陈燕相关推荐 • 适用于8753C的校正套件是什么？ 1553 • 85047A/8753E/ES频率范围灯 2565 • 8753C带有错误代码 1732 • 8753C/87054A 6 GHz故障排除 2054 • HP8753A网络分析仪输出功率有问题 2071 • Hp8753启动出现“致命错误内含”的消息 1622 • 8753C输出轨迹有噪音 1919 • 网络分析仪视频显示变色 1614 • 在8752C上有缺陷的A3源可以使用8752A部件吗？ 2112 • HP 8753D上的TRL怎么使用 1721 1个回答

答案对人有帮助，有参考价值 0 一些更新。我错误地将0-3 GHz而不是3.8-6.8 GHz应用到A3的混音器。我的sig gen可以输出最大4 GHz，所以我试着这样做。：D I在向混频器施加4 GHz - 0 dBm时测量RF OUT端口的信号：腔体频率= 3.8 GHz信号频率= 4 GHz RF OUT频率= 4 GHz - 3.8 GHz = 200 MHz因此调制器看起来很实用。但是我不能用> 4 GHz的频率测试它： - 我还试图检查A3的ALC功能：通过改变VNA的SOURCE POWER，我可以看到SA的功率变化。 SA的功率水平比VNA设定水平低约2 dB。此外，我尝试逐渐将sig gen输出电平从0 dBm更改为20 dBm，并且在SA处看不到任何RF OUT电平的变化。所以我猜ALC运作正常。我认为除了YTO之外，整个A3组件都能正常运行。问题是如何在没有YTO的情况下检查其余的仪器功能？以上来自于谷歌翻译以下为原文 Some updates. I mistakenly applied 0-3 GHz instead 3.8-6.8 GHz to the mixer of A3. My sig gen can output 4 GHz max, so I tried to do it. :D I measured signal at the RF OUT port when apply 4 GHz - 0 dBm to mixer: Cavity ocs frequency = 3.8 GHz Sig gen frequency = 4 GHz RF OUT freq = 4 GHz - 3.8 GHz = 200 MHz So mixer looks functional. But I can not test it with frequency >4 GHz :- I also tried to check ALC functionality of A3: By changing SOURCE POWER of VNA I can see a power changes at the SA. The power level at SA is ~2 dB lower than VNA set level. Also I tried gradually change sig gen output level from 0 dBm to 20 dBm and could not see any changing of RF OUT level at SA. So I guess the ALC operates properly. I think the entire A3 assembly operates properly except YTO. The question is how to check the rest of the instrument functionality without YTO?

2018-10-10 17:22:56 评论举报陈燕