如何获得KitProg2？

大家好，
我试图利用SPI的能力在“桥梁控制面板”，但它总是灰色的我。经过一点研究，似乎只有KITPROG2调试器才有功能。所以我想我需要其中一个。
根据KITPRO2用户指南，“KiTrp2集成到大多数PSoC®开发工具包。”我有一些PSoC 4200、4200米、5LP和BLE先驱基板。我所有的开发工具包都显示为KitProg（我在ID中没有数字2）。
几个问题…
1）我正确地理解了这个问题吗？在桥接控制面板应用程序中，我需要一个KITPRO2来获得SPI功能吗？
2）如果是这样的话…有没有办法升级我现有的KitProgs上的固件来获得KiTrp2功能？
3）如果这是不可能的…我在哪里得到KITPRO2设备？
谢谢。
-布瑞恩



     以下为原文
  Hi Everyone,

I was trying to utilize the SPI capability in the "Bridge Control Panel" but it is always greyed out for me.  After a bit of research it seems that functionality is only available with the KitProg2 debugger.  So I guess I need one of them.

According to the KitProg2 User's Guide, "The KitProg2 is integrated onto most PSoC ® development kits." I have some PSoC 4200, 4200M, 5LP and a BLE Pioneer Baseboard.  All of my dev kits show up as just KitProg (I see no number 2 in the ID).

A few questions...
1)  Am I understanding the problem correctly? Do I need a KitProg2 to get SPI functionality in the Bridge Control Panel application?
2) And if so...  Is there a way to upgrade the firmware on my existing KitProgs to get KitProg2 functionality?
3) And if that's not possible... How/Where do I get KitProg2 devices?

Thanks.
-Brian