[问答]

OMAPL138 PSC中写到说ARM是禁止的，DSP是默认使能的，为什么BOOT中又反过来了呢？

2020-8-11 11:27:25 1261 Boot

0 Power and Sleep Controller (PSC) 14 ARM AlwaysON (PD0) SwRstDisable — 15 DSP PD_DSP (PD1) Enable — PSC上面写的DSP是默认使能的，ARM是SwRstDisable,但是BOOT时为什么又改成ARM先启动，随后由ARM唤醒DSP了呢？同上，OAMPL137里写的PSC中是DSP默认为禁止，ARM使能，但是BOOT中也是反过来进行的，这是为什么呢？ OMAPL138在加电BOOT时，PSC已经配置，这时ARM不是被禁止的吗？它是怎么样启动还去唤醒DSP的呢？谢谢。 0
2020-8-11 11:27:25　　评论淘帖0 举报相关推荐 • 怎么让它反过来 1821 • omapl138被识别成dsp boot device 1798 • 请问怎么将丝印层的反过来? 1925 • 在OMAPL138的ARM核与DSP核上实现TL IPC双核通信开发 1799 • TI的omapl138芯片手册 20 • OMAPL138 technical reference man 6 • OMAPL138 DSP+ARM+FPGA无人机避障系统 1670 • 步进电机的运转方位与我规定的反过来，如何调节？ 6295 • 跨界造车真的是潮流吗？为何捧中兴反过来又踩乐视？ 624 • 请问OMAPL138 DSP与ARM模块的功率和工作电流 1178 1 个讨论

0 你好, PSC的默认值和bootloader不矛盾. 正因为ARM核默认是disable的, 所以一开始需要由DSP核去唤醒ARM核, ARM核起来后, DSP核进入IDLE状态, 所以DSP核还是需要ARM核去唤醒然后才能boot程序. OMAP-L138的boot sequence如下. When the device is powered on, it starts execution from DSP ROM. ARM is in in the disable state at this moment. The DSP ROM code will Read certain registers to know that ARM is present. (Otherwise it will be a DSP-only boot) Program PDSP0 to prepare for ARM reset vector. Bring ARM out of reset and let ARM starts execution from its ROM. (Yes, that's the main difference from OMAPL137 silicon 1.x. ARM has its own ROM and will master the boot process afterwards) DSP stills in the idle loop. ARM starts execution from its ROM. It will Put DSP into disable state (probably local reset). Initialize HW, i.e. PSC, PLL, external memory etc. Read bootcfg registers to decide what boot mode it will be and load and run ARM UBL from appropriate boot media, i.e. SPI flash, NAND, NOR etc. ARM UBL starts running. Its behavior is totally defined by the SW. For example, TI provided ARM UBL will load and run UBOOT which will further load and run Linux. The Linux application can load and run DSP .out via DSPLINK. This model is the same as DaVinci model. Industrial customers can choose to load and run a DSP AIS image in certain boot media. Meanwhile ARM UBL also starts booting UBOOT and Linux. In that way, DSP can start processing data before Linux finishing boot. OMAP-L137的boot sequence是基于DSP核的, 跟OMAP-L138是反的, 所以OMAP-L137可以不用ARM核, 只用DSP核启动.

2020-8-11 11:47:17 评论举报 1^# 余少虹