如何测量降低的CY8C20XX7能耗

为了在ACY8C20XX7中尽可能地减少功耗，该设备将重复测量，然后进入休眠模式一段时间。什么硬件可以在睡觉的时候关掉，然后快速接通以进行测量？具体的控制位清除csdplus_stop。也减少了多少力量，有任何问题，下列组件停止功能清除需要延迟或重新初始化：
```StasyNo.No```停止：
…
M8CX SETBANG0
；和reg [ amuxcfg ]，~ 0ch；断开内部电容器
和reg [ ` @ instance_name ` _capsense_cr2_reg ]，~ ` @ instance_name ` _cs_cr2_init；禁用预充电开关和断开的钻头
和reg [ ` @ instance_name ` _capsense_cr0_reg ]，~ 08h；禁用csdplus模式
和reg [ ` @ instance_name ` _capsense_cr3_reg ]，~ ` @ instance_name ` _cs_cr3_init；断电和断开的VRef Buffer
MOV reg [ ` @ instance_name ` _capsense_prs_cr_reg ]，00h ` @ ctab40 `；禁用PRS
苎麻属
雷特
谢谢



     以下为原文
   In order to reduce power consumption as much as possible in a CY8C20xx7,  the device will repeatedly make measurements and then enter sleep mode for a while.  What  hardware can be switched off while sleeping and then quickly switched on to make measurements?  Specifically the control bits cleared in CSDPLUS_Stop.  Also how much power is reduced and are there any issues, delays or reinitializations needed for the following components cleared in the stop function:
    _`@INSTANCE_NAME`_Stop:
    .....
     
       M8C_SetBank0
       ; and     reg[AMUXCFG], ~0ch ; Disconnect internal capacitor
       and   reg[`@INSTANCE_NAME`_CapSense_CR2_REG], ~`@INSTANCE_NAME`_CS_CR2_INIT ; Disable precharge switching and disconnect IDAC
       and   reg[`@INSTANCE_NAME`_CapSense_CR0_REG], ~08h ; Disable CSDPLUS mode
       and   reg[`@INSTANCE_NAME`_CapSense_CR3_REG], ~`@INSTANCE_NAME`_CS_CR3_INIT ; Power down and disconnect VRef Buffer
       mov  reg[`@INSTANCE_NAME`_CapSense_PRS_CR_REG], 00h  `@CTAB40`; Disable PRS
       RAM_EPILOGUE RAM_USE_CLASS_1
       ret
            
            
        Thanks