如何在Spartan3E Kit板上测试硬件许可证？

您好，可以尝试按照此处提到的步骤重新生成核心：http：//www.xilinx.com/support/documentation/sw_manuals/xilinx14_6/pp_p_process_regenerate_core.htm如果仍无法生成比特流，请附上xinfo文件开始菜单 - >
Xilinx设计工具 - > ISE设计套件 - >附件 - >点击Xinfo System Checker
问候，阿希什-----------------------------------------------
-  -  -  -  -  -  -  -  -  -  -  -  -  -  -  -  -  -  -  -  -  -  - -请注意-
如果提供的信息有用，请将答案标记为“接受为解决方案”。给予您认为有用且回复的帖子。感谢Kudos .--------------------
--------------------------------------------------
------------------------
在原帖中查看解决方案



以下为原文

Hello,

Can you try regenerating the core by following the steps mentioned here
http://www.xilinx.com/support/documentation/sw_manuals/xilinx14_6/pp_p_process_regenerate_core.htm

If it still fails to generate bitstream, please attach the xinfo file

Start Menu -> Xilinx Design Tools -> ISE Design Suite -> Accessories -> Click on Xinfo System CheckerRegards,
Ashish
----------------------------------------------------------------------------------------------
Kindly note- Please mark the Answer as "Accept as solution" if information provided is helpful.
Give Kudos to a post which you think is helpful and reply oriented.
----------------------------------------------------------------------------------------------View solution in original post

您好，请查看以下链接http://www.xilinx.com/support/documentation/sw_manuals/xilinx11/cgn_p_obtaining_full_system_hardware_evaluation_license.htm
问候，阿希什-----------------------------------------------
-  -  -  -  -  -  -  -  -  -  -  -  -  -  -  -  -  -  -  -  -  -  - -请注意-
如果提供的信息有用，请将答案标记为“接受为解决方案”。给予您认为有用且回复的帖子。感谢Kudos .--------------------
--------------------------------------------------
------------------------



以下为原文

Hello,

Please check below link
http://www.xilinx.com/support/documentation/sw_manuals/xilinx11/cgn_p_obtaining_full_system_hardware_evaluation_license.htmRegards,
Ashish
----------------------------------------------------------------------------------------------
Kindly note- Please mark the Answer as "Accept as solution" if information provided is helpful.
Give Kudos to a post which you think is helpful and reply oriented.
----------------------------------------------------------------------------------------------

查看NGDBuild错误消息表示使用我现在拥有的许可证重新生成核心。
我现在正在这样做。



以下为原文

Looking at the NGDBuild error message is says to regenerate the core with the license I now have. I am doing that now.

这就是诀窍。
获得新许可证后，您必须重新生成核心。
我得到了比特流。
感谢大家。
游泳队



以下为原文

That's the trick. You have to REGENERATE the core after you get the new license.
 
I got the bitstream.
 
Thanks to all of you.
 
Swimteam

你好@swimteam，
很高兴知道核心的重建有助于。
为了其他用户的利益，请将有用的帖子标记为解决方案，随意关闭该主题。
问候，阿希什-----------------------------------------------
-  -  -  -  -  -  -  -  -  -  -  -  -  -  -  -  -  -  -  -  -  -  - -请注意-
如果提供的信息有用，请将答案标记为“接受为解决方案”。给予您认为有用且回复的帖子。感谢Kudos .--------------------
--------------------------------------------------
------------------------



以下为原文

Hello @swimteam ,
 
Glad to know that regeration of the core helped.
Feel free to close the thread by marking helpful post as solution in the interest of other users.
Regards,
Ashish
----------------------------------------------------------------------------------------------
Kindly note- Please mark the Answer as "Accept as solution" if information provided is helpful.
Give Kudos to a post which you think is helpful and reply oriented.
----------------------------------------------------------------------------------------------