如何配置TCPWM引脚 ？

大家好，
我有一个简单的应用程序，在CY8C4145和我已经把一些引脚作为输入连接到一些作为输出和TCPWM组件。
问题是在P1.2-TCPWM3: P，我得到了一些不正确的信号。PIN P1.2与一个IpPoT引脚连接（见图像），但看起来像其他程序ti在那里输出一些值。
有没有人知道它是如何配置这个引脚的？
另一个问题：在创建者的组件目录中，几乎有2个Simiar定时器计数器TCPWM。有一个象形图像一棵树，另一个像一个RoMB。它们之间有什么区别？
亲切的问候，
丹尼尔
PSOC4内部配置
73.7 K



     以下为原文
  Hello All,
    I have a simple application and on a CY8C4145 and I have placed some pins as input connected to some as output and a TCPWM component.
    The issue it's that on P1.2 - TCPWM3:P I am getting some incorrect signals.  Pin P1.2 it's tied to a inpout pin (see image) but looks like some other procedure ti's outputting some values there.
    Does anybody has any ideea how it's configured this pin ?
    Another question : on Creator's  Component Catalogue  there are 2 almost simiar Timer Counter TCPWM. One has a pictogram like a tree and the other one like a romb . What would be the difference betweend them ?
     
    Kind Regards,
    Daniel

•    psoc4 internal config.jpg 73.7 K