完善资料让更多小伙伴认识你,还能领取20积分哦, 立即完善>
大家好!
我从USB开发开始,我想知道如何用外部主机(微控制器)在SX2中编程整个描述符。或者这是可能的使用PC和柏树驱动程序?有什么推荐给我的吗?最好使用EEPROM来加载描述符? 当做。 以上来自于百度翻译 以下为原文 Hi everyone! I am starting with the USB development, I would like to know how to program the entire descriptor in a SX2 with an external master (microcontroller). Or this is just possible using a PC and the cypress driver?? What recommend to me? Is better use an EEPROM to load the descriptor? Regards. |
|
相关推荐
1个回答
|
|
你好,
您可以使用EEPROM或外部主控器向SX2提供描述符。 如果你使用EEPROM,那么格式应该在SX2数据表的“引导方法”部分中。 如果使用外部主机加载描述符,则主机应该写入描述符RAM的500字节。写作应该根据数据表中提到的“命令协议”。 也请参阅数据表中的“枚举”部分以便于解释。 让我们知道,如果有任何疑问后,通过上述提到。 以下是SX2数据表的链接: HTTP://www. CyPress .COM/FIL/144251下载 当做, 血竭 以上来自于百度翻译 以下为原文 Hi, You can use either EEPROM or external master to supply descriptors to SX2. In case if you use EEPROM then the format should be as mentioend in the 'Boot Methods' section of the SX2 data sheet. If you use external master to load the descriptors then the master should write into the 500 bytes of descriptor RAM. The writing should be according to the "Command Protocol" mentioned in the data sheet. Also refer to "Enumeration" section in the data sheet for clear explanation. Let us know if there are any queries after going through the above mentioned scetions. For your reference below is the link for SX2 datasheet: http://www.cypress.com/file/144251/download Regards, Hemanth |
|
|
|
只有小组成员才能发言,加入小组>>
726个成员聚集在这个小组
加入小组1938 浏览 1 评论
1685 浏览 1 评论
3449 浏览 1 评论
请问可以直接使用来自FX2LP固件的端点向主机FIFO写入数据吗?
1608 浏览 6 评论
1406 浏览 1 评论
小黑屋| 手机版| Archiver| 电子发烧友 ( 湘ICP备2023018690号 )
GMT+8, 2024-6-26 21:53 , Processed in 0.673504 second(s), Total 77, Slave 60 queries .
Powered by 电子发烧友网
© 2015 bbs.elecfans.com
关注我们的微信
下载发烧友APP
电子发烧友观察
版权所有 © 湖南华秋数字科技有限公司
电子发烧友 (电路图) 湘公网安备 43011202000918 号 电信与信息服务业务经营许可证:合字B2-20210191