USBFS无法在Windows设备管理器中正确识别

你好-
使用PSoC创建者2.2；PSoC 5LP设备（CY8C5868 L），我正试图得到我们的USB信息显示在Windows设备管理器中。
在PSoC Creator；UBFS & G.UBUART组件中，我将设备描述符更改为我们的USB ID（0x923），并更改了产品ID（0x501）。
在字符串描述符选项卡中，我将字符串从CyPress信息更改为我们的公司/产品描述，并保存/应用。
当我重建项目时，当设备首先出现在设备管理器的“其他”下时，它显示为我给它的产品名称。但是，当我指向它的驱动程序后，它就重新命名为“CyPress USB UART”。
我找不到我应该改变的地方（我手动更改了UsBuTARG1 1CdC.IF文件以包括我的公司信息，但这并没有改变设备管理器如何枚举它）。
我尝试卸载驱动程序，重新构建项目，然后再连接，同样的结果，它首先识别我想要它，但在安装后，它重新命名为CyPress USB USAT。
必须有一个设置或步骤，我错过了，感谢任何帮助解决这个问题。
杰森



     以下为原文
   Hello -
    Using PSoC Creator 2.2; PSoC 5LP device (CY8C5868L), and I'm trying to get our USB information to display within Windows Device Manager.
    Within PSoC Creator; the USBFS -> USBUART component, I changed the Device Descriptor to our USB ID (0x2923) and changed the Product ID (0x501).
    In the String Descriptor tab; I changed the strings from Cypress information to our company / product descriptions, and saved / applied.
    When I rebuilt the project, and when the device first appeared under "Other" in the Device Manager, it showed as the product name I gave it.  However, when I point it to the driver, after it installs, it renames to "Cypress USB UART".
    I can't find where I'm supposed to change this (I manually changed the USBUART_1_cdc.inf file to include my company information, but that didn't change how Device Manager enumerated it).
    I tried uninstalling the driver, re-building the project, and then connecting again, and same result, it first identifies as I want it to, but after the driver installs, it re-names to Cypress USB USART.
    There must be a setting or step that I am missing, and appreciate any assistance in getting this resolved.
    Jason