不会产生任何脉冲

你的风扇和你的板之间的接口是什么，因为PSoC不能驱动400毫安。
鲍勃



     以下为原文
  What is your interface between the fan and your board, since the PSoC is not able to drive 400 mA
     
    Bob

是的，我知道。这就是为什么我从另一个12V电源给风扇供电，我只把风扇的PWM信号和技术信号直接连接到PSoC上。由于这些信号在本质上是数字的，并且可以直接连接到任何UC。



     以下为原文
  yes i know that. that's why i have given power to fan  from another 12v supply, i just connect pwm and tech signal of fan directly to psoc. as these signal are digital in nature  and can be connect to any UC directly.

奇怪的是，在这个AP笔记的例子1中，我看不到任何P 0.5连接。



     以下为原文
  Thats odd, in example 1 of this ap note I do not see any p 0.5 connections comitted.
     
     

谢谢您，先生。
但是该图属于主管理扩展板KIT CY8CKIT-036示例1，用于主机KIT-1001。但我所说的是PSoC3和PSoC5智能风扇控制器（Jason Konstas的应用说明66627）。
链接是
HTTP://www. CyPress？COM/？RID＝49077
但这不再是个问题了。我们可以将风扇控制器的输出连接到我们想要的任何端口。主要问题是风扇控制器输出被赋予任何端口，但是当我们把这个信号连接到风扇时，它不是风扇的控制速度。
我还使用该引脚的输出振荡器，看看它是否产生任何脉冲。但没有脉搏
在那个别针
意味着风扇控制器不产生特定频率和占空比的PWM脉冲或其他我找不到的东西。
那么问题是什么呢？
我想知道那件事。
为什么它没有产生任何脉冲。或者我正在以错误的方式监视
查看该引脚的输出。我只需将1根导线从该引脚连接到示波器的正端和示波器的GND连接到处理器模块的GND。我说的对吗？
我也把这个信号连接到风扇，但是风扇的速度没有变化，因为我正在通过开关改变占空比。



     以下为原文
  thank you sir
    but this diagram belongs to  Themal management expansion board kit CY8CKIT-036 example 1 for host kit-001. but i am talking about Psoc3 and PSoc5 intelligent fan controller (application note 66627 by  Jason Konstas).
    link for this is 
    http://www.cypress.com/?rID=49077
     
    but this is not a problem any more . we can connect output of bank  of fan controller to any port to which we want. main problem is that fan controller output is given to any port but when we connect this signal to fan it is not controlling speed of fan.
    i also use the output of that pin to oscillscope to see whether it is generating any pulse or not. but there is no pulse
    at that pin
    means fan controller either does not generate pwm pulse of particular frequency and duty cycle or any other thing that i am unable to find.
     
     
    then what is the problem?
    i want to know about that
    why it is not generating any pulse. or i am monitoring in a wrong way
    to see the output of that pin. i simply connect 1 wire from that pin to positive terminal of osciloscope and gnd of osciloscope is connected to gnd of processor module. am i right?
     
    i also connect this signal to fan but there is no change in speed  of fan as i am changing duty cycle via switchs

我去了那个链接，打开了所有的5个项目，不能看到一个单一项目与P00E5连接到什么？
存档你正在处理的项目并发布它。
问候，Dana。



     以下为原文
  I went to that link, opened all 5 projects, cannot see a single project with P_0_5 connected to anything ?
     
    Archive the project you are working with and post it.
     
    Regards, Dana.

也许这个项目是由柏树修改的。
我正在上传我正在工作的那个项目。
端口引脚没有问题。问题是为什么它没有产生PWM脉冲？



     以下为原文
   may be that project is modified by cypress.
    i am uploading that project i am working with. 
    port pin is not problem. problem is why it is not generating a pwm pulse?

并附上申请说明。请看。
AN66 627
1.1兆字节



     以下为原文
   and application note is also attached with this post. please see it.

•   AN66627_001-666271.pdf 1.1 MB