完善资料让更多小伙伴认识你,还能领取20积分哦, 立即完善>
我找不到解决这个问题的办法是不成功的。
在PNA-X / PNA-L分析仪上,我设置它使用asyn相对简单,然后轮询事件寄存器。 现在的问题是我无法找到一个“可靠”的方法来检查命令(“SENS:CORR:COLL:ECAL:SOLT4 1,2,3,4”)以完成a)增加超时 不合理的价值b)计算时间并增加估计的睡眠时间。 有没有更好的方法来处理这个? 我试图看看我是否可以实施任何其他类型的轮询方法甚至* wai支持,但无济于事。 任何有关这方面的帮助将不胜感激。 谢谢。编辑:mhreider于2012年11月7日下午3:08 以上来自于谷歌翻译 以下为原文 I've been unsuccessful in finding a way to deal with this. On the PNA-X/PNA-L analyzers I've set up it was relatively simple to use asyn and then poll the event register. The problem now is I'm unable to find a "reliable" method to check for the command ("SENS:CORR:COLL:ECAL:SOLT4 1,2,3,4") to finish short of either a) Increasing the timeout to unreasonable values b) time it and add in an estimated sleep. Is there a better way to handle this? I've tried to see if I could implement any other sort of polling methods or even *wai support, but to no avail. Any help with this would be greatly appreciated. Thanks. Edited by: mhreider on Nov 7, 2012 3:08 PM |
|
相关推荐
1个回答
|
|
好吧,我会试一试!
如果我有任何其他问题,我会通知你。 谢谢您的帮助。 编辑:只是为了更新,这完美无瑕。 :)部分原因是我只需要意识到我必须允许超时足够长的时间来覆盖ECal期间的扫描长度。 再次感谢你!编辑:mhreider于2012年11月20日下午2:34 以上来自于谷歌翻译 以下为原文 Alright, I'll give this a shot! I'll let you know if I have any other problems with it. Thanks for the help. EDIT: Just to update, this worked flawlessly. :) Part of it was that I just needed to realize I had to allow for a timeout long enough to cover the length of a sweep during the ECal. Thank you again! Edited by: mhreider on Nov 20, 2012 2:34 PM |
|
|
|
只有小组成员才能发言,加入小组>>
2111 浏览 1 评论
1874 浏览 1 评论
1727 浏览 5 评论
2599 浏览 3 评论
将设备连接到PC并通过asic格式读取数据然后我的网络分析仪挂起
1572 浏览 4 评论
520浏览 1评论
关于Keysight x1149 Boundary Scan Analyzer
374浏览 0评论
1436浏览 0评论
N5230C用“CALC:MARK:BWID?”获取Bwid,Cent,Q,Loss失败,请问大佬们怎么解决呀
285浏览 0评论
2267浏览 0评论
小黑屋| 手机版| Archiver| 电子发烧友 ( 湘ICP备2023018690号 )
GMT+8, 2024-5-15 21:32 , Processed in 1.257511 second(s), Total 78, Slave 61 queries .
Powered by 电子发烧友网
© 2015 bbs.elecfans.com
关注我们的微信
下载发烧友APP
电子发烧友观察
版权所有 © 湖南华秋数字科技有限公司
电子发烧友 (电路图) 湘公网安备 43011202000918 号 电信与信息服务业务经营许可证:合字B2-20210191 工商网监 湘ICP备2023018690号