MPLAB X V3.45停止正常工作

你好。MPLAB X V3.45停止正常工作。我编辑了我的main.c文件，但是编译器似乎在编译前一个版本时没有进行最新的编辑？我甚至在编译器通常找到的最新编辑中发现了几个打字错误，但是，编译器没有发现错误，看起来是在运行旧代码？然后我尝试在初始化代码的早期改变LED的状态，编译器没有发现错误，并且在运行时LED没有变化？我尝试了以前的MPLAB X版本，同样的行为。重新启动计算机，同样的行为。接下来我将打开一个新的项目并粘贴旧的一个？如果那行不通，我会尝试一个大大简化的新程序，看看是否能够再次控制HW。有人知道我在IDE中激活的一个“特性”吗？我还没有弄清楚如何管理我的代码的多个版本，但是IDE似乎在没有我的帮助下做它！问候，Pete WhiteHW Geek



      以下为原文

    Hello.  
MPLAB X V3.45 stopped working correctly.
I edited my main.c file however the comipiler seems to be stuck compiling the previous version without the latest edits?  
I even found a couple of typos in the lateset edits the compiler would normaly find but, the compile found no errors and appeard to be running the old code?
Then I tried to change the state of an LED early in the initialization code, the compiler founds no errors and there was no change in the LED at run time?
I tried the previous MPLAB X version, same behavior.  
Re-booted the computer, same behavior.
Next I will open a new project and paste the old one in?
If that doesn't work, I will try a vastly simlified new program and see if I can control the HW again.
Does anyone know of a "feature" that I mayhave activated in the IDE?
I have not figured out how to manage multiple versions of my code but, the IDE seems to be doing it without my help!

Regards,

Pete White
HW Geek