MPLAB X 3.45 MDB代码覆盖率Java错误

信息：OS:Windows 10MPLAB X版本：V3.45 PIC:PIC24FJ64 GA204I一直试图让MDB工作在代码覆盖范围内，但遇到Java错误。请参阅下面的错误消息。我正在运行带有配置文件的MDB，下面也会显示。生成MPLAB X（使用模拟器的设置）中的CODECPLAGE输出似乎很好。我已经试着作为管理员运行，但结果相同。这是MDB中的一个bug，还是我在这里做了什么错事？错误消息：MDB命令



      以下为原文

    Information:
OS: Windows 10
MPLAB X version: v3.45
PIC: PIC24FJ64GA204

I've been trying to get the MDB working with code coverage, but ran into an Java error. See below for the error message.
I'm running the MDB with an configuration file, also shown below. Generating the codecoverage output in MPLAB X (using the simulator's settings) seems to work just fine. I've already tried to run as administrator, but same result.
Is this a bug in the MDB or am I doing something wrong here?

Error message:
Programming target...

Resetting SFRs
Resetting peripherals
Program succeeded.

set codecoverage.enabled "Enabled/Reset on Run"

set codecoverage.enableoutputtofile true

set codecoverage.outputfile "C:UsersjdebruijnDocumentsGitHubVSPcodecoverage.txt"


Reset
Resetting SFRs
Resetting peripherals

Sleep 1500

Run
Running

Sleep 5000

Quit
Simulator halted
Stop at
        address:0x1e40

>E0108-SIM: Failed simulator operation: java.lang.NullPointerException
   com.microchip.mplab.mdbcore.simulator.Simulator.RunTarget(Simulator.java:342)

   com.microchip.mplab.mdbcore.debugger.MCDebugger$1.run(MCDebugger.java:352)

   java.lang.Thread.run(Thread.java:745)

Exception in thread "Thread-5" java.lang.NullPointerException
        at com.microchip.mplab.mdb.debugapi.CodeCoverageReport.GenerateReport(CodeCoverageReport.java:183)
        at com.microchip.mplab.mdb.debugapi.CodeCoverageReport.DoReport(CodeCoverageReport.java:123)
        at com.microchip.mplab.mdb.debugapi.CodeCoverageReport.access$000(CodeCoverageReport.java:36)
        at com.microchip.mplab.mdb.debugapi.CodeCoverageReport$1.run(CodeCoverageReport.java:71)
        at java.lang.Thread.run(Thread.java:745)

MDB commands.txt:
Device PIC24FJ64GA204
Hwtool SIM
set oscillator.frequency 8
set oscillator.frequencyunit Mega
set oscillator.rcfrequency 1
set oscillator.rcfrequencyunit Kilo
Set uart1io.uartioenabled true
Set uart1io.output file
Set uart1io.outputfile "C:UsersjdebruijnDocumentsGitHubVSPout.txt"
Program "C:UsersjdebruijnDocumentsGitHubVSPVSP.XdistdefaultproductionVSP.X.production.hex"

set codecoverage.enabled "Enabled/Reset on Run"
set codecoverage.enableoutputtofile true
set codecoverage.outputfile "C:UsersjdebruijnDocumentsGitHubVSPcodecoverage.txt"

Reset
Sleep 1500
Run
Sleep 5000
Quit