关于VC ++中GPIF设计和API的问题

你好，
回答你的第一个问题：
在68013的情况下，只有当您想配置68013个芯片作为主机时，才会使用GPIF设计器工具开发波形。这就是为什么你发现这些文，仁和OE总是走出68013个芯片。
但是，在CYSUB3014的情况下，您需要使用GPIFIIDESIGER工具来配置从属模式和主模式。所以输入和输出线不会自动改变。您需要手动输入输入和输出的数量。我们也应该命名它们。你可以在“界面设置”页面底部找到“输入：”、“输出：”。可以使用此页配置接口。
来谈谈你的第二个问题：
请安装位于Hypp//wwwyCysP.COM/的CyPress超速USB套件安装程序？RID＝57990。
您可以使用Sturor应用程序作为应用程序开发的参考。（C:CyPress  CyPress超高速UBSuthoApple  CPP拖缆）。
返乡，
西克里希纳。



     以下为原文
  Hi,
   
    Answer to your 1st question:
   
    In case of 68013, you will be developing the wave forms using the GPIF designer tool only when you want to configure the 68013 chip to act as master. That is the reason why you find these WEN, REN and OE are always coming out of the 68013 chip.
   
    But here in case of CYUSB3014, you need to use GPIF II designer tool for configuring both in slave and master modes. So the input and output lines does not change automatically. You need to manually enter the number of inputs and outputs. Also we should be naming them. You can find the "Inputs:", "outputs:" at the bottom of the "Interface settings" page. You can configure your interface using this page.
   
    Coming to your 2nd question:
   
    Please install      Cypress SuperSpeed USB Suite Installer      located in http://www.cypress.com/?rID=57990.
   
    You can use Streamer application as a reference for your application development. (C:CypressCypress SuperSpeed USBSuiteapplicationcppstreamer).
   
    Reagrds,
   
    sai krishna.

谢谢你，赛克利纳。
我只想知道我的项目中的CyAPI，我发现语法和FX2一样。但是，当我尝试通过EP0发送一些数据到3014，基于EPT & Gt；XFEDATA，我还没有在一些FixWuW示例中找到FixWuy的接收函数代码。
然后我去FixWieAPI指南，我发现“DMA管理”部分可以用于这个函数。所以，我徘徊，如果它是我告诉的关键，是否有任何EP0通信的Expple？
非常感谢。
当做，
奥尔塔



     以下为原文
   Thank you , sai krishna.
    I just figure out the CYAPI in my project and I find that the syntax is same as the FX2. But when I try to send some data to 3014 via EP0 based on 'ept->XferData' , I have not found the recive function code of the fireware in some fireware examples.
    Then I go to Fireware API Guide, and I found the 'DMA Management' part might be used for the function. So I wander if it is the key of what I told and is there any exmples for EP0 communication?
     
    Thank you so much.
    Regards,
    orta