如何发出ARB RUN/STOP？

嗨，ARB使用标准瞬态系统来触发。
这是我在VB 6.0中编写的一个片段：使用仪器'向仪器发送电源重置.WriteString“* RST”.WriteString“* CLS”'查询仪器的IDN字符串.WriteString“* IDN？”
IDN = .ReadString'设置arb up .WriteString“TRIG：TRAN：SOUR BUS，（@ 1）”。WRriteString“VOLT：MODE ARB，（@ 1）”。WRriteString“ARB：FUNC：TYPE VOLT”＆amp;
channel .WriteString“ARB：FUNC：SHAP UDEF”＆amp;
channel .WriteString“ARB：VOLT：UDEF：LEV”＆amp;
arbValues＆amp;
channel .WriteString“ARB：VOLT：UDEF：DWEL”＆amp;
arbTimes＆amp;
channel .WriteString“CURR 0.5”＆amp;
channel .WriteString“OUTP ON”＆amp;
channel .WriteString“INIT：TRAN（@ 1）”。WRriteString“* TRG”End With让我知道它是如何工作的。



     以下为原文

  Hi,

The ARB uses the standard transient system to trigger.  Here is an snippet that  I wrote in VB 6.0:

    With Instrument
        ' Send a power reset to the instrument
        .WriteString "*RST"
        .WriteString "*CLS"

        ' Query the instrument for the IDN string
        .WriteString "*IDN?"
        IDN = .ReadString

        ' Set the arb up
        .WriteString "TRIG:TRAN:SOUR BUS,(@1)"
        .WriteString "VOLT:MODE ARB, (@1)"
        .WriteString "ARB:FUNC:TYPE VOLT" & channel
        .WriteString "ARB:FUNC:SHAP UDEF" & channel
        .WriteString "ARB:VOLT:UDEF:LEV " & arbValues & channel
        .WriteString "ARB:VOLT:UDEF:DWEL " & arbTimes & channel
        .WriteString "CURR 0.5" & channel
        .WriteString "OUTP ON" & channel
        .WriteString "INIT:TRAN (@1)"
        .WriteString "*TRG"
    End With


Let me know how it works.