PLTS 2012 TRL设计和验证向导出错

嗨，我在我的电脑上试过这个，但我没有看到这个问题。
你能告诉我们你副本的版本是什么（转到菜单[帮助] - > [关于PLTS ...]）？
如果您尚未升级到我们最新的PLTS2012更新1，我建议您这样做。
如果升级时遇到问题，升级后仍然无法升级;
请等几天，该功能的研发工程师目前已不在办公室，并将在本周四回来。
我相信他会在回来后很快为你解决这个问题。
希望您能在2012年9月29日获得更多信息。



     以下为原文

  hi, I tried this in my PC, and I did not see the issue. Could you tell us what's the version of your copy (go to menu [help] -> [about PLTS...])? If you have not upgraded to our latest PLTS2012 update 1, I recommend you to do so.

If you have trouble to upgrade or it still occurs after upgrade; Please wait a few days, the R&D engineer of the feature currently is out of office, and will back in this Thursday. I believe he will fix this for you soon after he comes back. Hopefully you could get more information on Sep. 29, 2012.

您好yapzhang，谢谢您的及时回复。
我还没有升级到PLTS 2012的最新版本。我是否知道此更新是否包含适用于TRL设计向导的补丁？
我希望R＆amp; D工程师在回来时可以帮助我。
再次感谢。



     以下为原文

  Hi yapzhang,

Thank you for the prompt reply. I have not upgraded to the latest version of PLTS 2012. May I know if this update has patches that are for the TRL design wizard? I hope the R&D engineer could kindly help me on this when he is back.

Thanks once again.

您好cmwong：对不起我迟到的回复。
“无法写入Touchstone文件”错误是一个错误，我可以复制它并将其修复到补丁中。
但是，当将TRL校准套件下载到PNA时，我无法复制错误。
您是否可以执行以下操作来帮助我调试问题：1。在下载TRL校准套件之前，将校准套件定义保存到文件并发送给我（文件 - >保存在TRL向导菜单上）。
2.在下载TRL校准套件之前，打开PNA SCPI命令监视器以记录PLTS发送到PNA的SCPI命令。
您可以通过进入PNA菜单“系统 - >配置 - > SICL / GPIB / SCPI”，在对话框中选中“显示GPIB总线监控窗口”，在下载后检查SCPI监控窗口上的“开”
发生错误，将SCPI命令打印到文本文件并发送给我。
3.您可以尝试使用TRL向导中的简单步骤复制问题：启动TRL向导，在步骤2中单击“计算”，然后转到步骤7并单击“下载到PNA”。
这样，默认的校准套件定义将下载到PNA。
谢谢。
我的电子邮件是ning_cheng@agilent.com，你可以在这里发布你的更新或直接给我发电子邮件。编辑：ningchen于2012年9月28日上午1:33



     以下为原文

  Hello cmwong:
Sorry for my late reply. The "Can not write to Touchstone file" error is a bug, I can replicate it and will fix it in a patch.
But I am not able to replicate the error when downloading the TRL cal kit to PNA. Would you please do the following to help me debug the issue:
1. Before downloading the TRL cal kit, save the cal kit definitions to a file and send it to me (File->Save on the TRL wizard menu).
2. Before downloading the TRL cal kit, turn on the PNA SCPI command monitor to record the SCPI commands that PLTS sent to the PNA. You can do so by going to PNA menu "System->Configure->SICL/GPIB/SCPI", check the "Show GPIB Bus Monitor Window" on the dialog, check the "On" on the SCPI monitor window, after the download error occur, print the SCPI commands to a text file and send it to me.
3. You may try to replicate the issue with simple steps in the TRL wizard: Launch the TRL wizard, click "Calculate" in step 2, then go to step 7 and click "Download to PNA". In this way the default cal kit definitions will be downloaded to the PNA.
Thanks. My email is ning_cheng@agilent.com, you can either post your updates here or send me emails directly.

Edited by: ningchen on Sep 28, 2012 1:33 AM

如果你去PNA的cal kit列表，列表中有多少个校准套件？



     以下为原文

  If you go to the cal kit list in your PNA, how many cal kits are in the list?

嗨Danzy先生，PNA共有59个校准套件。
这会产生问题吗？



     以下为原文

  Hi Mr Danzy,

There were a total of 59 cal kits in the PNA. Will that create a problem?

正如早期版本的固件中所讨论的，在大多数软件中都存在50 cal kit“限制”。
PNA只能在非制导校准中使用前50个校准套件，并且在导向校准中可以使用一段时间。
这些限制最近已被修改为无指导的95校准套件，我认为引导校准没有限制。
这需要一些较新的固件，旧的PNA无法加载。



     以下为原文

  As discussed in earlier versions of firmware there was a 50 cal kit "limit" in most software.  The PNA could only access up to the first 50 cal kits in unguided calibration and for some time in guided cal.  These limitations have recently been modified to 95 cal kits in unguided and I think no limit in guided cal.  This requires some newer firmware that the older PNA's cannot load.

嗨，ningcheng，我附上了cal kit文件和SCPI日志文件供你参考。
希望它能为您提供更多洞察力。
非常感谢。
TRL_wizard_updated_kit.xml8.7 KB



     以下为原文

  Hi ningcheng,

I have attached the cal kit file and the SCPI log file for your reference. Hope it can provide you with more insight.

Thanks very much.

附件

• SCPIMonitor.txt21.0 KB
  
• TRL_wizard_updated_kit.xml8.7 KB
  

您好Chiemeng Wong：非常感谢您提供详细信息。
当PLTS向PNA发送以下命令时出现“-114，Header后缀超出范围”的错误：“sense：correction：collect：ckit 51”。
如果您转到PNA手册并查看命令“SENSe：CORRection：COLLect：CKIT [：SELect]”，您将看到固件版本A.07.50.48最多可以有50个用户定义的校准套件
，但你有59个校准套件。
也许您可以备份一些不经常使用的校准套件并在PNA上删除它们，以确保少于50个校准套件来解决问题。
对于“无法写入Touchstone文件。数据不完整”的其他错误，我将使用修复程序进行新的构建并发送链接以下载它。
最诚挚的问候，程宁



     以下为原文

  Hello Chiemeng Wong:
Thanks very much for your detailed information. The error of "-114, Header suffix out of range" occured when PLTS sent the following command to the PNA: "sense:correction:collect:ckit 51". If you go to the PNA manual and take a look at the command "SENSe:CORRection:COLLect:CKIT[:SELect] ", you'll see there can be 50 user defined cal kits in maximum for firmware version A.07.50.48, but you have 59 cal kits. Maybe you can backup some of your not frequently used cal kits and delete them on the PNA to make sure there are less than 50 cal kits to solve the issue.
For the other error of "Can not write to Touchstone file. Data is not complete", I'll make a new build with the fix and send you to link to download it.
Best Regards, Cheng Ning

检查您的私信收件箱中是否有程宁提到的补丁版​​本链接。



     以下为原文

  Check your private message inbox for the link Cheng Ning mentioned with the patch version.

嗨郑宁和Danzy，我可以知道你是否可以再次提供链接给我？
我无法提前访问该链接。
非常感谢。



     以下为原文

  Hi Cheng Ning and Danzy, may I know if you can provide the link to me again? I am not able to access the link earlier.

Thanks very much.

请检查您的私人消息。



     以下为原文

  Please check your private messages.