RS232主站和从站没有连接

你好。我是一名大学生，致力于创建无线遥控器的项目。我的教授给了我一个CY3653开发工具包。我们正计划使用远程无线USB模块。所发送的数据将通过串行RS232连接发送到无线USB模块。在移动到RS232示例之前，我决定尝试其他例子。WUSB模块用协议教程进行了预编程，该程序运行良好。我已把他们的无线电的教程中的程序，它也工作的很好。（我使用PSoC Designer V4.4与国际展贸中心Lite编译）。问题开始当我试图计划协议教程和RS232主人-奴隶的程序。但是模块之间不能相互连接。由于无线电教程是工作的很好，有软件没问题。有人能在这个问题上给我提建议吗？- ARNV



     以下为原文
          Hello.   
I am an undergraduate student working on a project to create a wireless remote control. My professor has given me a CY3653 development kit. We are planning to use the Wierless USB module to for the remote . The data to be transmitted will be sent to the Wireless USB module via a serial RS232 connection.   
Before moving on to the RS232 examples, I decided to try out the other examples.   
The WUSB modules came pre programmed with the protocol tutorial which worked perfectly. I programmed them with the radio tutorial program, it also worked fine.(I am using PSoc Designer v4.4 with the HiTEC Lite compiler).The problems started when I tried to program the protocol tutorials and the RS232 Master- Slave programs.   
But the to modules are unable to connect with each other.   
Since the radio tutorial is working perfectly fine, there is no problem with the software.   
Can someone please advise me on this issue.   
   
-Arnav