WINC1500可以在独立模式下使用吗？

我正在努力（从阅读文档中），如果有可能使WC1500在一个“独立”模式下运行，由此它的内置GPIO线可以被处理来触发消息的发送。RN171可以做到这一点，但是“应用”关闭了，所以不可能增加乐趣。我意识到我可以通过添加一个外部微控制器来做我想做的事情，但是在我看来，对于简单的工作（例如，当GPIO输入被激活时发送一个固定的消息），对在架构内存在的（公认的小）微控制器进行这一切是非常方便的。WiC1500本身。对于应用中的电源和空间预算是非常有限的，使得使用外部微控制器甚至不太理想。作为开发人员，是否可以直接将功能写入WiC1500固件？提前感谢，



      以下为原文

    I'm trying to work out (from reading the documentation) if it is possible to make the WINC1500 operate in a "standalone" mode, whereby its built-in GPIO lines can be processed to trigger the sending of messages.
The RN171 can do this, but the "application" is closed, so it is not possible to add functionality.
I realise I can do what I want by adding an external microcontroller, but it seems to me that for simple jobs (e.g. send a fixed message when a GPIO input is activated) it would be very handy to do all this on the (admittedly small) microcontroller which exists within the architecture of the WINC1500 itself.
Also, for the application in question power and space budgets are very limited, making the use of an external microcontroller even less desirable.
Is it possible - as a developer - to write functionality directly into the WINC1500 firmware?

Thanks in advance,