通过命令行控制ICD4

嗨，伙计们，我们曾经使用命令行中的ICD3和MB.BAT.然后我们购买了6个ICD4来加速生产，因为这个程序员更快，但是它似乎不与Mb.BAT.问题：如何通过外部应用来控制它呢？我们希望自动化它。你推荐的任何文件我们都退房了吗？如何与它进行交互？例如命令行接口、Web服务调用、DLL、API、COM对象、COM端口？如果它只能通过MPLAB来控制的话，它就不适合作为一个生产程序员。特别是我们希望只连接一次程序员，而不是每次编程一个芯片，或者浪费太多的时间。谢谢任何帮助！



      以下为原文

    Hi Guys,

We used to use ICD3 via the command line with mdb.bat.
We then bought 6 x ICD4's to speed up production since this programmer is faster.
However it does not seem to work with mdb.bat.

Question: How does one control it via an external application? We wish to automate it. Any documents you recommend we check out? How does one interface with it? e.g. Command line interface, web service calls, DLL, API, com objects, COM port?

As it stand if it can only be controlled via MPLAB it is not suitable as a production programmer.
In particular we wish to connect to the programmer only once, not every time a chip is programmed, or else that wastes too much time too.

Thanks for any help!