完善资料让更多小伙伴认识你,还能领取20积分哦, 立即完善>
电子发烧友论坛|
你好,
我计划将WICE应用程序移植到Linux中,但是,下面的库似乎没有源码。 BasLyGual.ARMYCM4.释放。 我在图书馆里找到了这些符号,比如“PosithTangStxxxxx”和“WiDeDePosixTangXxxx”,但我不知道它是否是CyPress的属性源代码。 如果不是财产,我在哪里可以找到图书馆的源代码? 谢谢, Soohwan。 以上来自于百度翻译 以下为原文 Hi, I am planning to port wiced application into Linux however, the following library seems doesn't have source code. BESL_generic.ARM_CM4.release.a I found these symbol which like "supplicant_tls_xxx" and "wiced_supplicant_xxx" in the library but I wonder whether it's Cypress property source code or not. If It's not property one where can I find the source code for the library? Thanks, Soohwan. |
|
相关推荐
4个回答
|
|
|
BESL已经迁移到MebttLS。相同的源代码可在WICEWICED Studio 3.0MFI43XXXYW-FIWICEStAc\BESLMbEdTLS*OPEN。
以上来自于百度翻译 以下为原文 BESL had been migrated to mbedTLS. The source code for the same is available at WICEDWICED-Studio-6.0-mfi43xxx_Wi-FiWICEDsecurityBESLmbedtls_open. |
|
|
|
|
asd013 发表于 2018-12-11 10:58 GRSR写道: BESL已经迁移到MebttLS。相同的源代码可在WICEWICED Studio 3.0MFI43XXXYW-FIWICEStAc\BESLMbEdTLS*OPEN。 但这并不包括所有的源代码。 例如,源代码中没有提供PooPixTyPrimeSug事件()。 以上来自于百度翻译 以下为原文 grsr wrote:But that does not include all source code. for example, the implementation of supplicant_process_event() is not available in source code. |
|
|
|
|
|
需要更多的细节来帮助你的要求。
我们已经编写了使用Linux和WICE的应用程序,这些程序使用安全套接字。 我们在WICE/Linux上搭建了一个薄薄的层,使用这个层的API来构建我们的应用程序。我假设您希望使用BESL来实现安全套接字,如果是这样的话,您应该在Linux中使用常规的开放式SSL。 以上来自于百度翻译 以下为原文 Would need more details than that to help with what you are asking. We have written apps that work with both Linux and Wiced which use secure sockets. We built a thin layer on top of WICED/Linux and use the API from this layer to build our app. I am assuming you are looking to use BESL for secure sockets, if that is the case you should use regular Open SSL in Linux. |
|
|
|
|
redsworm 发表于 2018-12-11 11:15 VSuBiAH1779701写道: 需要更多的细节来帮助你的要求。 我们已经编写了使用Linux和WICE的应用程序,这些程序使用安全套接字。 我们在WICE/Linux上搭建了一个薄薄的层,使用这个层的API来构建我们的应用程序。我假设您希望使用BESL来实现安全套接字,如果是这样的话,您应该在Linux中使用常规的开放式SSL。 所以你不使用BESL库中的任何封闭源码API吗? 是否可以共享“WITRES/Linux”上的“薄层”代码? 以上来自于百度翻译 以下为原文 vsubbiah_1779701 wrote:So you don't use any closed-source API from BESL library? Is it possible to share the code for "thin layer on top of WICED/Linux"? |
|
|
|
|
只有小组成员才能发言,加入小组>>
788个成员聚集在这个小组
加入小组cyUSB3014一直显示2.1,不能到3.0情况,谁遇到过
7347 浏览 0 评论
2485 浏览 1 评论
2178 浏览 1 评论
4045 浏览 1 评论
请问可以直接使用来自FX2LP固件的端点向主机FIFO写入数据吗?
2089 浏览 6 评论
CY8C4025LQI在程序中调用函数,通过示波器观察SCL引脚波形,无法将pin0.4(SCL)下拉是什么原因导致?
7848浏览 2评论
CYUSB3065焊接到USB3.0 TYPE-B口的焊接触点就无法使用是什么原因导致的?
6410浏览 2评论
CX3连接Camera修改分辨率之后,播放器无法播出camera的画面怎么解决?
757浏览 2评论
729浏览 2评论
使用stm32+cyw43438 wifi驱动whd,WHD驱动固件加载失败的原因?
8260浏览 2评论
/9
小黑屋| 手机版| Archiver| 电子发烧友 ( 湘ICP备2023018690号 )
GMT+8, 2025-12-13 17:58 , Processed in 1.114879 second(s), Total 80, Slave 63 queries .
Powered by 电子发烧友网
© 2015 bbs.elecfans.com
关注我们的微信
下载发烧友APP
电子发烧友观察
版权所有 © 湖南华秋数字科技有限公司
电子发烧友 (电路图) 湘公网安备 43011202000918 号 电信与信息服务业务经营许可证:合字B2-20210191

淘帖
1695